User's Manual

CPU/MemoryBoardsand Components 3-21
3
4. Eject the faulty SIMM by pressing down on the ejection levers on both
sides of the SIMM connector.
See Figure 3-14.
Figure 3-14 Ejecting a SIMM
5. Holding the SIMM by its edges, remove it from the slot and place it on an
antistatic surface.
3.4.5.2 InstallingaMemoryModule
Requirements
All banks must have the same size SIMMs, however, SIMMs from different
manufactures are interchangeable in a single bank if the SIMMs all have the
same capacity and speed. Sort the SIMMs into banks of 8 using the same size
SIMMs.