Server User Manual
Table Of Contents
- Sun Fire™ X2250 Server Service Manual
- Contents
- Preface
- Sun Fire X2250 Server Overview
- Troubleshooting
- Performing Diagnostics
- 3.1 Pc-Check Diagnostics Overview
- 3.2 System Information Menu Options
- 3.3 Advanced Diagnostics Tests Menu Options
- 3.4 Immediate Burn-in Testing
- 3.5 Deferred Burn-in Testing
- 3.6 Create Diagnostic Partition Option
- 3.6.1 Removing Existing Partitions From a Hard Disk
- 3.6.2 Adding a Diagnostic Partition to the First Bootable Disk
- 3.6.3 Creating a Log File on the Diagnostic Partition
- 3.6.4 Accessing the Diagnostic Partition on a Red Hat Linux System
- 3.6.5 Accessing the Diagnostic Partition on the Solaris 10 Operating System
- 3.6.6 Accessing the Diagnostic Partition on the Windows Server 2003 Operating System
- 3.7 Show Results Summary
- 3.8 Print Results Report
- 3.9 About Pc-Check
- 3.10 Exit to DOS
- Maintaining the Sun Fire X2250 Server
- 4.1 Tools and Supplies Needed
- 4.2 Installation Precautions
- 4.3 Powering Off the Server and Removing the Cover
- 4.4 Locations of Server Components
- 4.5 Component Replacement Procedures
- 4.5.1 Replacing the I/O Board
- 4.5.2 Replacing the PCIe Card and Riser Assembly
- 4.5.3 Replacing a Hard Disk Drive and Carrier
- 4.5.4 Replacing an HDD Backplane Assembly
- 4.5.5 Removing and Installing the ODD Drive Assembly
- 4.5.6 Replacing the Air Duct
- 4.5.7 Replacing the Power Supply
- 4.5.8 Replacing the Single Fan Module
- 4.5.9 Replacing the Dual Blower Module
- 4.5.10 Replacing Memory Modules
- 4.5.11 Replacing the System Battery
- 4.5.12 Replacing a CPU and Heatsink
- 4.5.13 Installing a New CPU
- 4.5.14 Replacing Cables
- 4.5.15 Motherboard
- System Specifications
- Using the Tools & Drivers CD
- Installing the Server Into a Rack With Optional Slide Rails
- C.1 Disassembling the Slide Rails Before Installation
- C.2 Installing the Mounting Brackets Onto the Server
- C.3 Attaching the Slide-Rail Assemblies to the Rack
- C.4 Installing the Server Into the Slide-Rail Assemblies
- C.5 Installing the Cable Management Assembly
- C.6 Verifying Operation of the Slide Rails and CMA
- Index
Index-1
Index
A
air duct
location, 1-6, 4-5
replacing, 4-20
altitude specifications, A-3
B
battery
location, 1-6, 4-5
replacing, 4-33
BIOS firmware
CD, 1-4
updating with ILOM web interface, B-5
updating with local DVD drive, B-2, B-3
updating with TFTP using CLI, B-4
blower module
location, 1-6, 4-5
replacing, 4-26
BMC firmware
CD, 1-4
C
cable connections, 4-45
cable management assembly, C-9
cables
motherboard connections, 4-45
replacing, 4-45
CMA assembly, C-9
CMOS, clearing, 1-9
components
orderable, 1-9
replacing, 4-6
cover removal, 4-3
CPUs
features, 1-2
installing new, 4-41
location, 1-6, 4-5
replacing, 4-36
customer orderable components, 1-9
customer replaceable unit procedures
field replaceable unit procedures, 4-6
D
depth of system, A-1
diagnostic partition
accessing
Red Hat Linux, 3-13
Solaris 10, 3-15
Windows XP, 3-16
adding, 3-12
log file, 3-12
removing, 3-10
diagnostics
advanced diagnostics option, 3-4
deferred burn-in testing option, 3-9
hard disk testing, 3-6
immediate burn-in testing option, 3-7
main menu options, 3-2
Pc-Check information, 3-18
print results reports option, 3-18
running from PXE server, B-7
show results summary option, 3-16
shut down option, 3-18
system information menu options, 3-3
Tools & Drivers CD, B-1