Server User Manual
Table Of Contents
- Sun Fire™ X2250 Server Service Manual
- Contents
- Preface
- Sun Fire X2250 Server Overview
- Troubleshooting
- Performing Diagnostics
- 3.1 Pc-Check Diagnostics Overview
- 3.2 System Information Menu Options
- 3.3 Advanced Diagnostics Tests Menu Options
- 3.4 Immediate Burn-in Testing
- 3.5 Deferred Burn-in Testing
- 3.6 Create Diagnostic Partition Option
- 3.6.1 Removing Existing Partitions From a Hard Disk
- 3.6.2 Adding a Diagnostic Partition to the First Bootable Disk
- 3.6.3 Creating a Log File on the Diagnostic Partition
- 3.6.4 Accessing the Diagnostic Partition on a Red Hat Linux System
- 3.6.5 Accessing the Diagnostic Partition on the Solaris 10 Operating System
- 3.6.6 Accessing the Diagnostic Partition on the Windows Server 2003 Operating System
- 3.7 Show Results Summary
- 3.8 Print Results Report
- 3.9 About Pc-Check
- 3.10 Exit to DOS
- Maintaining the Sun Fire X2250 Server
- 4.1 Tools and Supplies Needed
- 4.2 Installation Precautions
- 4.3 Powering Off the Server and Removing the Cover
- 4.4 Locations of Server Components
- 4.5 Component Replacement Procedures
- 4.5.1 Replacing the I/O Board
- 4.5.2 Replacing the PCIe Card and Riser Assembly
- 4.5.3 Replacing a Hard Disk Drive and Carrier
- 4.5.4 Replacing an HDD Backplane Assembly
- 4.5.5 Removing and Installing the ODD Drive Assembly
- 4.5.6 Replacing the Air Duct
- 4.5.7 Replacing the Power Supply
- 4.5.8 Replacing the Single Fan Module
- 4.5.9 Replacing the Dual Blower Module
- 4.5.10 Replacing Memory Modules
- 4.5.11 Replacing the System Battery
- 4.5.12 Replacing a CPU and Heatsink
- 4.5.13 Installing a New CPU
- 4.5.14 Replacing Cables
- 4.5.15 Motherboard
- System Specifications
- Using the Tools & Drivers CD
- Installing the Server Into a Rack With Optional Slide Rails
- C.1 Disassembling the Slide Rails Before Installation
- C.2 Installing the Mounting Brackets Onto the Server
- C.3 Attaching the Slide-Rail Assemblies to the Rack
- C.4 Installing the Server Into the Slide-Rail Assemblies
- C.5 Installing the Cable Management Assembly
- C.6 Verifying Operation of the Slide Rails and CMA
- Index
Index-3
physical specifications, A-1
postinstallation instructions, 4-3
Power button, 1-5
power connector, 1-5
power LED, 1-5
power problems
troubleshooting, 2-4, 2-5
power specifications, A-2
power supply
location, 1-6, 4-5
replacing, 4-22
powering off server, 1-8
for service, 4-3
troubleshooting, 2-4
powering on server
main power, 1-8
standby power, 1-7
troubleshooting, 2-4
precautions for installation, 4-2
preinstallation instructions, 4-2
product updates, -xi
PXE server
accessing Tools & Drivers CD, B-10
diagnostics, B-7
setting up Tools & Drivers CD, B-7
R
rack installation, C-1
rear panel connectors, 1-5
rear panel LEDs, 1-5
Red Hat Enterprise Linux
accessing software, 1-3
supported versions, 1-3
removing cover, 4-3
replacing
air duct, 4-20
battery, 4-33
cables, 4-45
CPUs, 4-36
dual blower module, 4-26
DVD drive, 4-18
hard disk drive, 4-13
I/O board, 4-7
memory modules
PCI-Express card, 4-9
power supply, 4-22
single fan modules, 4-25
S
serial connector
features, 1-2
location, 1-5
serial connector pin assignments, A-4
serial management port, 1-5
service support phone number, 2-7
shock specifications, A-3
single fan modules
location, 1-6, 4-5
replacing, 4-25
slide-rail installation, C-2
software
preinstalled, 1-3
supported operating systems, 1-3
Solaris 10 operating system, 1-3
specifications
environmental, A-3
physical, A-1
power, A-2
standby power, applying, 1-7
SunSolve web site, 2-7
Supplemental CD, 1-4
support contacts, 2-7
SUSE Linux Enterprise Server
accessing software, 1-3
supported versions, 1-3
system identification button, 1-5
system identification LED, 1-5
system management, 1-4
T
technical assistance contacts, 2-7
temperature derating, A-3
temperature specifications, A-3
Tools & Drivers CD
accessing from PXE server, B-10
contents, B-1
diagnostics software, B-1
driver installation scripts, B-1
Intel PROSET driver software, B-11
setting up on PXE server, B-7
updating BIOS, B-2, B-4