User's Manual

Chapter 2 Install Server Module Optional Components 9
Note – Server module options and their part numbers are subject to change over
time. For the most up-to-date list of components for the Sun Blade X6270 Server
Module, click on the X6270 Server Module product page at:
http://sunsolve.sun.com/handbook_pub/Systems/
3 Compact Flash module
The Compact Flash module is shown in FIGURE 2-1 under the REM.
4a DIMMs
The DIMMs in
FIGURE 2-1 are shown populated in DIMM slots 2, 5, 8 for each CPU.
Note - Processor chip contains memory controller. Do not attempt to populate DIMMs
sockets next to unpopulated (empty) CPU sockets.
4b DIMM filler panels
DIMM filler panels are shown populated in DIMM slots 0, 1, 3, 4, 6 and 7.
The DIMM filler panels should remain in unpopulated DIMM slots until the DIMM
filler panel can be replaced with a DIMM. Otherwise, you might experience a reduction
in system performance.
5 CPU heatsinks (up to two CPUs can be installed)
The minimum CPU configuration shipped includes one CPU with a heatsink. An air
baffle is shipped to cover the empty CPU socket (not shown in
FIGURE 2-1). Additional
CPUs can be ordered.
In the example shown in
FIGURE 2-1, the CPUs are installed under the two heatsinks
6 Storage drives (hard disk drives or solid state drives) (up to 4 drives may be populated)
Figure Leg end Server Module Optional Componets