User's Manual

14 Sun Blade X6270 Server Module Installation Guide • December 2009
Server Module Optional Components
Installation Procedures
The Sun Blade X6270 Server Module is shipped with a standard configuration. The
optional components ordered for the Sun Blade X6270 Server Module are shipped
separately and can be installed by the customer, with the exception of the CPU
option. The CPU option should be installed by a qualified Sun service technician.
Caution – The server module options installation procedures in this chapter assume
that the server module has not yet been installed or powered-on in the system
chassis. For information about replacing or adding options on a server module that
is installed in the system chassis and powered-on, see the Sun Blade X6270 Server
Module Service Manual.
When installing server module optional components, refer to the following
procedures:
■ “Adding Memory Modules” on page 14
■ “Adding a CPU Module” on page 19
■ “Adding a CompactFlash Module” on page 22
■ “Adding a RAID Expansion Module” on page 23
■ “Adding a Fabric Expansion Module” on page 27
■ “Adding a Hard Disk Drive or Solid State Drive” on page 29
Adding Memory Modules
The Sun Blade X6270 Server Modules are shipped with standard memory
configurations. If you ordered additional memory, a kit for the additional memory is
shipped separately.
Refer to the following information when adding memory modules to the X6270
Server Module:
■ “Memory Module Installation Considerations” on page 15
■ “DIMM and CPU Physical Layout” on page 15
■ “DIMM Population Rules” on page 16
■ “DIMM Rank Classification Labels” on page 17
■ “Install DIMMs” on page 18