User's Manual

Chapter 2 Install Server Module Optional Components 19
FIGURE 2-4 DIMM Socket Release and Alignment
e. Verify that the DIMM ejector levers are upright, seated, and tight. Press on
ejector levers to ensure that they are engaged properly.
4. Install the cover on the server.
See “Install Cover on Server” on page 11.
Adding a CPU Module
The Sun Blade X6270 Server Module is shipped with a preinstalled CPU
configuration. If you ordered an alternative CPU assembly option, the optional CPU
assembly is shipped separately.
The CPU assembly option contains a CPU chip and a heatsink with preapplied
thermal grease. CPU assembly options should only be installed by a Sun qualified
service technician.
Refer to the following procedure when adding a CPU to the Sun Blade X6270 Server
Module.
Figure Leg end DIMM Socket Release and Alignment
1 DIMM connector slot
2 DIMM connector key
3 DIMM ejector lever