User's Manual

42 Sun Blade X6270 Server Module Installation Guide • December 2009
Note – Direct management of an individual server module is through the
embedded server module SP, Sun Integrated Lights Out Manager (ILOM). Access to
the server module SP is made through the serial port or the chassis monitoring
module (CMM) management network. For more information about server-level
management or chassis-level management in ILOM, see the system chassis
documentation or the Sun Integrated Lights Out Manager 2.0 User’s Guide or Sun
Integrated Lights Out Manager 3.0 Documentation Collection.
Caution – You should use the dongle cable for configuration and service purposes.
Disconnect the dongle cable from the server module after the configuration or
service operation is complete to avoid damaging the cable.
▼ Attach Devices to Server Using the 3-Cable
Dongle
1. Insert the dongle cable into the universal connector port (UCP) on the server
module front panel.
See
FIGURE 3-3.
2. Attach the connectors on the dongle cable to the appropriate devices.
See “Dongle Cable Connectors” on page 43.