SunPumps PCA & PCC Controller Data Sheet

PCA & PCC Series
Brushless DC Pump Controllers
SunPumps PCA and PCC series
pump controllers are high quality,
micro-processor controlled DC
power converters designed as the
interface between a sensorless
brushless DC powered pump and
the power solar array. The main
purpose of a PC series controller
is for motor commutation, supply
maximum power point tracking
for the solar modules and provide
protection for the controller.
Independent Water
Pumping Systems
un umps
p
s
un umps
p
s
TM
SOLAR PUMPING PRODUCTS
The PC series controllers will boost
the current of solar modules in low
sunlight conditions while holding
the voltage of the solar modules
at the maximum power point.
This allows a pump to start much
earlier in the morning and stay
running longer in the evening.
SunPumps PC series pump controllers have many unique features designed specifically for water
pumping. All PC series controllers include a pump speed control circuit, a remote switch circuit, a
sensor-less low water cut-off circuit, an electronic circuit breaker and indicator lights. The PCC
series controllers have an LCD screen that displays motor voltage, current, motor speed and power.
CONTROLLER SPECIFICATIONS
Quality First!
[phone]
[phone]
Fax:
Phone:
www.sunpumps.com
PCA Series Controller
PCC Series Controller
Model Number
Model Number
PCA-60-BLS-M2
PCA-120-BLS-M2
PCC-120-BLS-M2
PCC-180-BLS-M2
PCC-240-BLS-M2
Min
Voltage
Min
Voltage
Max
Voltage
Max
Voltage
Minimum Power
Low Battery
Voltage
Maximum Power
Maximum Power
Low Water
Cut-Off Min
Nominal
Voltage
Low Water
Cut-Off Max
Dead Battery
Shut Down
Nominal
Voltage
60V
300 W
50 W
840 W
Set by LWC
100V
30V
120V
120V
180V
240V
500 W
585 W
1023 W
1023 W
50 W
100 W
100 W
100 W
48 V
44 V
1000 W
1500 W
2250 W
3000 W
2000 W
Set by LWC
Set by LWC
Set by LWC
Set by LWC
47 V
200V
200V
300V
380V
63.9V
90V
90V
120V
220V
49V
PCC-48-BLS-M2
Min Voltage is the minimum voltage which the controller must have in order to start the motor. Voltages lower than this
will not damage the controller but it will not attempt to start the motor.
1
(1)
4009458
Conforms to UL Stds 1081 & 1563
Made in America