SCS Pump Series Brochure

SCS SERIES
BRUSHLESS DC
SUBMERSIBLE PUMPS
The submersible motors incorporate the latest in high
efficiency, permanent magnet, sensorless brushless DC
technology and there are no electronics inside the motor.
They are constructed of corrosion resistant, stainless steel.
SunPumps SCS series pumps can be installed below
the water level in a water well, lake, river, or cistern.
They can be used to fill an open tank or used to press-
urize water systems.
SunPumps SCS series pumps are designed for use in
stand alone water delivery systems. They are pollution
free, corrosion-free, self-lubricating and quiet. There is
no better way to provide water for remote homes, small
farms, villages, livestock, irrigation as well as many other
needs beyond grid power.
SunPumps PCA and PCC Sensorless Brushless DC Controllers incorporate the
latest state of art technology. The controllers are micro-processor based and have
MPPT, Maximum Power Point Tracking to keep the solar array operating at peak
efficiency at all times. The control box is powder coated, die-cast aluminum with
an extra large heat sink and rated for outdoor use.
Independent Water
Pumping Systems
5 to 200 GPM
19 to 756 LPM
un umps
p
s
un umps
p
s
TM
SOLAR POWER SOLUTIONS
SunPumps SCS series submersibles are high quality,
maintenance-free, DC powered pumps specifically made
for water delivery in remote locations.
to 3000 watts of DC power with voltage choices ranging from
24 to 240 volts.
They operate on150
The pump ends are multi-stage centrifugals constructed
of stainless steel. The impellers are wear resistant glass
filled, engineered composite and are resistant to
mineral and algae deposits. The bowls are constructed
of stainless steel for strength and abrasive resistance.
Quality First!
[phone]
[phone]
Fax:
Phone:
For free system sizing, technical
support, or to place an order call:
For more products and services
check our web site on-line at:
www.sunpumps.com
All Stainless!
Made In America