Care Instructions Durango 32" Square Outdoor Fire Pit Sku: 101009 Most metal outdoor furniture is finished with paint, varnish, or powder coating to prevent rust. This product is quality built and made to last. The frame structure of this unit is made of powder-coated steel extrusion and under normal use, should resist rusting. Should rusting however, occur, we suggest using a steel brush on the affected area followed by a spray coating of popular anti-rust paint.
Package Contents This fire pit is intended for Outdoor Use Only! DO NOT use on wooden decks. This fire pit is intended to Burn Wood Logs Only! DO NOT burn coal, leaves or other combustible materials in the fire pit. NOT for use by children. Keep children and pets away from the fire pit. Fire pits is hot, use with caution. NEVER touch hot fire pit with bare hands. NEVER leave burning fire pit unattended and always extinguish fire completely before leaving the fire pit.
1 Assembly Instructions Place mantle (B) on soft, even clean surface with the groove side upwards to form a square. Connect each by using bolts (H1). (See figure below) Loosely tighten all bolts, complete bolt tightening process after four mantle parts are connected. 4 Tighten all the bolts accordingly with Allen wrench (N) until all pieces fit together securely. Then turn the assembled fire pit frame over so that it sits securely (legs down) on a flat surface.
