User Manual

9
Seat Adjustment
Square Slide System
(EZ-1 SX, EZ-Sport CX and EZ-Tandem CX/AX)
1. Seat can be adjusted fore and aft by loosening the two
Quick Release Seat Pins “A” under the seat.
2. Position seat in the following manner: When seated,
your knee should be just slightly bent when the forward
foot is in the farthest position.
3. Tighten the two quick release seat pins under the seat.
Figure 10
“A” Quick Release Seat Pins
CAUTION:
Never fasten Quick Release Seat Pins by rotating the
quick release lever. Simply rotating the lever in a circular
motion will not fasten the seat. Detachment of the seat as
a result of improper Quick Release Seat Pin installation
can result in serious bodily injury.