Instructions / Assembly
X - fastener
location
X
X X
X
X X
• If you are installing the 14” or 21”x48” extensions, refer to those instructions first
before continuing.
• Remove protective plastic film from inside the reflective material.
• For the 22” extensions, wrap around to connect your tube top & bottom. Then
carefully remove the double sided tape strip and lightly press to seal.
• Use the tek-point screws provided to attach the extension or elbow to another
extension or elbow - equally distance the screws at the top & bottom of the
connection as shown in the drawing.
• Use the aluminum tape provided to seal all seams for a completed installation.
14“
10“
OR
Tube Accessory Instructions
#2555