a Steam Master® Irons ® Manual de Instrucciones Planchas Steam Master MODEL S/ 4211, 4212, 4213, 4214, MODELOS 4215, 4216, 4219, 4220 Instruction Manual www.sunbeam.com P.N.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: READ ALL INSTRUCTIONS BEFORE USE • Use iron only for its intended use. • To protect against risk of electric shock, do not immerse the iron in water or other liquids. • The fabric select dial and steam lever should always be turned to “O/Off” before plugging or unplugging from out let. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
I RONING G UIDE FABRIC SUGGESTED FABRIC SELECT STEAM SETTING DIAL SETTING I RONING R ECOMMENDATIONS Acrylic O/Off (Dry) Synthetic Iron garment inside out Acetate O/Off (Dry) Synthetic Iron garment inside out while still damp. Polyester O/Off (Dry) Synthetic Iron garment inside out while still damp. Rayon O/Off (Dry) Synthetic Iron garment inside out. Silk O/Off (Dry) Silk Iron garment inside out. Use an ironing cloth* to prevent shine marks.
FEATURES OF YOUR STEAM MASTER® IRON 7 8 ® 1. SPRAY MIST Release 9 6 2. Covered Water Fill Hole 3. Fabric Select Dial 5 4. Steam / Self-Clean Lever 4 5. SPRAY MIST® Button 6. SHOT OF STEAM® / Vertical Steam Button (select models only) 7. Power Indicator Light / MOTION SMART® Auto-Off Indicator 1 8. Soft Grip Handle 3 2 9. 360° Tangle-Free Swivel Cord (select models only) 11 10. Retractable Cord (select models only) 11. Anti-Calcium System (select models only) – Inside Water Reservoir 12.
I RONING T IPS • Always read garment labels and follow the manufacturer’s ironing instructions. • Sort the articles to be ironed according to the type of fabric. • You should first iron garments requiring low temperature (e.g., silks and synthetics) to avoid damaging them with an iron that is too hot. • If you are unsure of the fabric content of the garment, test a small area, such as a seam or facing, before ironing a visible area.
TO FILL THE WATER RESERVOIR 1. Make sure the iron is unplugged. Set the Steam Lever to O/Off (Dry) and the Fabric Select Dial to OFF. 2. Lift the Water Fill Hole Cover. 3. Fill water cup with water. Pour water into iron water reservoir. Do not fill water reservoir beyond maximum fill level. WARNING: To prevent the risk of burns, be careful when filling a hot iron with water. Hot metal parts, hot water and steam can cause injuries. DRY IRONING 1.
U SING THE I RON ’ S S PECIAL F EATURES SPRAY MIST FEATURE ® The SPRAY MIST® feature is a powerful water spray mist that dampens the fabric to aid in removing wrinkles from heavy fabrics and for setting creases. To use the SPRAY MIST® Feature: Press the SPRAY MIST® button firmly. SHOT OF STEAM® FEATURE The SHOT OF STEAM® feature provides an extra burst of steam for deep penetration of stubborn wrinkles.
To reset the iron: Move the iron back and forth and allow it to reheat for 2 minutes. The indicator will stop blinking and the iron will start heating again. WARNING: The patented MOTION SMART® Auto-Off is a safety feature, not a recommended means for turning your iron off. See “Caring for Your Iron After Use” for information on turning off your iron and storing it safely between use. ANTI-CALCIUM SYSTEM (select models only) The Anti-Calcium System is a permanent system located inside the water reservoir.
to Off. M AINTAINING Y OUR S TEAM M ASTER I RON ® CLEANING THE SOLEPLATE Clean the soleplate if starch or other residue accumulate. To clean the Soleplate: 1. Allow the iron to cool and then wipe it with a soft, damp cloth. WARNING: DO NOT use abrasive cleansers, scouring pads or vinegar to clean the soleplate. This will damage the finish. 2. Run the iron over an all-cotton cloth to remove any residue.
1 Year Limited Warranty Sunbeam Products, Inc, or if in Canada, Sunbeam Corporation (Canada) Limited (collectively “Sunbeam”) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. Sunbeam, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component.
PRECAUCIONES IMPORTANTES Cuando use algún aparato eléctrico siempre deben seguirse precauciones básicas de seguridad incluyendo las siguientes: LEA TODAS LAS INSTRUCCIONES ANTES DE USAR • Use la plancha únicamente para el uso al que está destinada. • Para protegerse contra el riesgo de un choque eléctrico, no sumerja la plancha en agua ni en otros líquidos.
GUÍA TELA DE SELECCIÓN DE VAPOR SUGERIDA PLANCHADO DISCO DE SELECCIÓN DE TELA RECOMENDACIONES DE PLANCHADO Acrílico O/Off (Dry) O/Apagado (Seco) Synthetic (Sintética) Planche la prenda por el revés. Acetato O/Off (Dry) O/Apagado (Seco) Synthetic (Sintética) Planche la prenda por el revés mientras está húmeda. Poliéster O/Off (Dry) O/Apagado (Seco) Synthetic (Sintética) Planche la prenda por el revés mientras está húmeda.
CARACTERÍSTICAS DE SU PLANCHA STEAM MASTER® 7 8 1. Accionador de SPRAY MIST® 9 6 2. Orificio para Cargar Agua con Tapa 3. Perilla Selectora de Telas 5 4. Palanca de Vapor / Autolimpieza 4 5. Botón SPRAY MIST® 6. Botón SHOT OF STEAM® / Vapor Vertical (modelos seleccionados únicamente) 3 2 7. Luz Indicadora de Encendido / Indicadora de Apagado Automático MOTION SMART® 1 8. Mango con Asa Blanda 9. Cable con Giro de 360° Sin Enredos 11 10 10.
RECOMENDACIONES PARA EL PLANCHADO • Siempre lea las etiquetas de la prenda y siga las instrucciones de planchado del fabricante. • Clasifique las prendas que va a planchar según el tipo de tela. • Primero debe planchar las prendas que requieren baja temperatura (por ejemplo, las prendas de seda y tela sintética) a fin de evitar dañarlas con una plancha que esté demasiado caliente.
PARA LLENAR EL RESERVORIO DE AGUA 1. Asegúrese de que la plancha esté desenchufada. Ponga la palanca de vapor en O/Off (Dry) (O/Apagado [Seco]) y la perilla de selección de telas en Off (Apagado). 2. Levante la tapa del orificio para cargar agua. La tapa se puede retirar y se puede volver a colocar cuidadosamente en las ranuras. 3. Llene la taza con agua. Vierta el agua en el reservorio de agua de la plancha. No llene el reservorio de agua más allá del nivel máximo de llenado.
USO DE LAS FUNCIONES LA FUNCIÓN SPRAY MIST® ESPECIALES DE LA PLANCHA La función SPRAY MIST® es una poderosa niebla de agua que humedece la tela para ayudar a eliminar las arrugas de las telas gruesas y para marcar los dobleces. Para usar la función SPRAY MIST®: Presione el botón SPRAY MIST® firmemente. LA FUNCIÓN SHOT STEAM® OF ® La función SHOT OF STEAM brinda un chorro de vapor adicional para penetración profunda en arrugas rebeldes.
Para reiniciar la plancha: Mueva la plancha hacia atrás y hacia adelante y déjela volver a calentar durante 2 minutos. El indicador dejará de titilar y la plancha comenzará a calentar nuevamente. ADVERTENCIA: La función patentada de apagado automático MOTION SMART® es una función de seguridad, no una forma recomendada de apagar su plancha. Consulte en “Cuidado de Su Plancha Después del Uso”, la información sobre cómo apagar su plancha y almacenarla con seguridad después del uso.
MANTENIMIENTO LIMPIEZA DE LA DE SU PLANCHA STEAM MASTER ® BASE Limpie la base si se acumula almidón o algún otro residuo. Para limpiar la base: 1. Deje enfriar la plancha y luego pásele un paño suave y húmedo. ADVERTENCIA: NO use limpiadores abrasivos, esponjas de metal ni vinagre para limpiar la base. Esto dañará el acabado. 2. Pase la plancha por un paño de puro algodón para eliminar cualquier residuo.
Garantía Limitada de 1 Año Sunbeam Products, Inc., o si en Canadá, Sunbeam Corporation (Canadá) Limited (colectivamente “Sunbeam”) garantiza que este producto estará libre de defectos en material o mano de obra por un período de un año a partir de la fecha de la compra. Sunbeam, a su elección, reparará o reemplazará este producto o cualquier componente del producto que se encuentre defectuoso durante el período de garantía. El reemplazo será efectuado por un producto o componente nuevo o remanufacturado.
For product questions: Sunbeam Consumer Service USA : 1.800.458.8407 Canada : 1.800.667.8623 www.sunbeam.com ©2004 Sunbeam Products, Inc. All rights reserved. SUNBEAM,® STEAM MASTER,® MOTION SMART,® SHOT OF STEAM® and SPRAY MIST® are registered trademarks of Sunbeam Products, Inc. DRIP FREE™ is a trademark of Sunbeam Products, Inc. In Canada, imported and distributed by Sunbeam Corporation, Limited. In the United States, distributed by Sunbeam Products, Inc.