Micro Furnace Ceramic Disc Heaters Instruction Booklet This book covers the use and care of the following Micro Furnace heaters: MF2000 2000W Micro Furnace Ceramic Disc Heater MF1500 1500W Micro Furnace Ceramic Disc Heater Please read these instructions carefully and retain for future reference.
Contents Sunbeam’s Safety Precautions Safety Precautions for your heater Sunbeam’s Total Safety System Features of your 2000W Micro Furnace Features of your 1500W Micro Furnace Using your heater Care and cleaning 1 2 3 4 6 8 9
Sunbeam’s Safety Precautions • • • • • • • • Sunbeam are very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance: Read carefully and save all the instructions provided with an appliance. Always turn the power off at the power outlet before you insert or remove a plug.
Sunbeam’s Safety Precautions • This heater becomes hot during use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (90cm) away from the front of the heater and keep them away from the sides and rear. • Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left unattended.
Sunbeam’s Total Safety System Safety auto shut off Your Sunbeam Micro Furnace Heater is equipped with a safety system that detects any abnormally high temperatures within the heater and automatically shuts it off to prevent overheating. This first stage of the safety system requires the user to manually reset the heater for it to resume operation. For instructions on how to reset your heater, see page 6.
Features of your 2000W Micro Furnace heater Electronic thermostat The electronic thermostat works with the external temperature sensor to maintain your selected temperature. It constantly monitors the room’s temperature and continuously varies the heat output to maintain your desired comfort level.
Temperature light The temperature light illuminates red once the selected temperature level is reached. Removable dust filter The filter collects dirt and dust from the air circulating through the heater. It is removable for easy cleaning. Mode/Standby button Use the standby button to select the desired operating mode. Pressing the standby button once selects the AUTO mode, twice selects the MANUAL mode, and pressing a third time selects the STANDBY mode.
Features of your 1500W Micro Furnace heater Mode dial Use the mode dial to select the desired operating mode: FAN to circulate cool air; HEAT to operate the heater, or OFF. Thermostat dial Use the thermostat dial to select the desired temperature, from 10°C to 27°C. Once the selected temperature level is reached, the thermostat will contantly adjust the heat output to maintain it.
Power light Illuminates to indicate that the heater is connected to the power outlet and is switched on. Temp limit light Illuminates to indicate that the room has reached the selected temperature. Removable dust filter The filter collects dirt and dust from the air circulating through the heater. It is removable for easy cleaning.
Using your heater MF2000 Micro Furnace Ceramic Disc Heater 1. Place the heater on a flat level surface, approximately 1 metre from any wall or other objects such as furniture, curtains, plants or combustible material, and ensure that the air intake and outlet are clear of obstructions. Note: For most efficient heating, place the heater on the floor where the air is cooler, near an outside door, the bottom of a staircase, or where colder air is most likely to be entering the room. 2.
Using your heater (continued) MF1500 Micro Furnace Ceramic Disc Heater 1. Place the heater on a flat level surface, approximately 1 metre from any wall or other objects such as furniture, curtains, plants or combustible material, and ensure that the air intake and outlet are clear of obstructions. Note: For most efficient heating, place the heater on the floor where the air is cooler, near an outside door, the bottom of a staircase, or where colder air is most likely to be entering the room. 2.
Consumer Hotline Australia 1800 025 059 New Zealand (09) 912 0747 www.sunbeam.com.au is a registered trademark of Sunbeam Corporation Limited. is a registered trademark of Pelko Electric Company and is used under licence by Sunbeam Corporation Limited. Made in China. Due to minor changes in design or otherwise, the product you buy may differ from the one shown in this leaflet. Backed by Sunbeam‘s 3 Year Replacement Guarantee and National Service Network. © Copyright. SUNBEAM CORPORATION LIMITED 2004.
