Micro Furnace Cera ic Disc Heaters Instruction Bookdet This book covers the use and care of the following Micro Furnace heaters: MF2000 2000W Micro Furnace Ceramic Disc Heater MF1500 1500W Micro Furnace Ceramic Disc Heater Pdease read these instructions carefuddy and retain for future reference.
Contents Sunbeam’s Safety Precautions Safety Precautions for your heater Sunbeam’s Total Safety System Features of your 2000W Micro Furnace Features of your 1500W Micro Furnace Using your heater Care and cleaning 1 2 3 4 6 8 9
Sunbea ’s Safety Precautions • • • • • • • • Sunbeam are very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance: Read carefully and save all the instructions provided with an appliance. Always turn the power off at the power outlet before you insert or remove a plug.
Sunbea ’s Safety Precautions • This heater becomes hot during use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (90cm) away from the front of the heater and keep them away from the sides and rear. • Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left unattended.
Sunbea ’s Totad Safety Syste Safety auto shut off Your Sunbeam Micro Furnace Heater is equipped with a safety system that detects any abnormally high temperatures within the heater and automatically shuts it off to prevent overheating. This first stage of the safety system requires the user to manually reset the heater for it to resume operation. For instructions on how to reset your heater, see page 6.
Features of your 2000W Micro Furnace heater Electronic thermostat The electronic thermostat works with the external temperature sensor to maintain your selected temperature. It constantly monitors the room’s temperature and continuously varies the heat output to maintain your desired comfort level.
6
7
Using your heater MF2000 Micro Furnace Cera ic Disc Heater 1. Place the heater on a flat level surface, approximately 1 metre from any wall or other objects such as furniture, curtains, plants or combustible material, and ensure that the air intake and outlet are clear of obstructions. Note: For most efficient heating, place the heater on the floor where the air is cooler, near an outside door, the bottom of a staircase, or where colder air is most likely to be entering the room. 2.
3 Year Repdace ent Guarantee We are so confident of the quadity of our productB shoudd this appdiance devedop any adfunction within 3 years of purchase (3 Months co erciad use) due to faudty ateriads or anufactureB we widd repdace it for you absodutedy free. Should you experience any difficulties with your appliance, please phone our free call customer service line for advice on 1800 025 059 in Australia, or 0800 786 232 in New Zealand.
Consu er Hotdine In Austradia Visit www.sunbea .co .au Or cadd 1800 025 059 In New Zeadand Visit www.sunbea .co.nz Or cadd 0800 786 232 is a registered Trade ark of Sunbea . is a registered trademark of Pelko Electric Company and is used under licence by Sunbeam Corporation Limited. Made in China. Due to inor changes in design or otherwiseB the product ay differ fro the one shown in this deafdet. © Copyright. Sunbea Corporation Li ited 2006.