user manual

8
Quick cleaning method.
Half fill the blender with luke warm water
and a small amount of detergent. Press
the PULSE button for 10-20 seconds.
Then remove the jug and rinse it under
running water.
For thorough cleaning.
Turn the blender jug upside down. Unscrew
the six-blade assembly from the glass jug by
placing the open end of the ingredient cap
at the base of the blade assembly. Use the 5
grooves on the opening of the ingredient cap
to align the cap to the base of the glass jug.
Turn the ingredient cap in an anti-clockwise
direction to remove the blade assembly. See
Figure 3.
Remove the rubber seal from the blade
assembly. Wash the blender lid, ingredient
cup, rubber seal, blade assembly and blender
jug in warm soapy water.
Caution: Take care when cleaning the blades
as they are extremely sharp.
Note: Do not clean any part of the blender in
the dishwasher.
To clean the motor base.
Use a damp, soft sponge with mild detergent
and wipe over the motor base.
Note: Never immerse the motor base in water.
Care and Cleaning
Figure 3