AutoGrinder II Automatic coffee grinder Instruction Booklet EM0420 Please read these instructions carefully and retain for future reference.
Contents Sunbeam’s Safety Precautions 1 Features of your Sunbeam AutoGrinder II 2 Handy hints for grinding coffee beans with the Sunbeam AutoGrinder II 4 Using your Sunbeam AutoGrinder II 5 Care and Cleaning of your Sunbeam AutoGrinder II 6 Important instructions – retain for future use.
Sunbeam’s Safety Precautions SAFETY PRECAUTIONS FOR YOUR SUNBEAM AUTO GRINDER II. • Always place the unit on a flat, level surface. • • • • • • • • • Sunbeam is very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance: Read carefully and save all the instructions provided with an appliance.
Features of your AutoGrinder Transparent cover For ease of use the cover of the AutoGrinder II also doubles as a measuring cup and being transparent the user is able to observe the coffee beans being ground. Removable grinding bowl A convenient removable grinding bowl for easy grind removal and cleaning. One touch power button Easy to operate, simply press the power button and your work is done, the grinder will automatically stop when the selected grind is achieved.
Grind selector The AutoGrinder II gives you 5 choices of grind; coarse for plunger coffee through to fine for espresso coffee. Sliding cup selector Adjustable cup setting from 4 to 15 cups. Cord storage Convenient and clever cord storage.
Handy hints for grinding coffee beans with the Sunbeam AutoGrinder II • For a good cup of coffee only grind the amount you need for immediate use, as ground coffee quickly loses its flavour and aroma. • With the Sunbeam AutoGrinder II coffee beans can be ground from a range of coarse to a very fine grind. The required coffee grind will be determined by the brewing method used or style of coffee desired.
Using your Sunbeam AutoGrinder II Before using your Sunbeam AutoGrinder II, wipe the grinding bowl and blades clean with a damp cloth and wash the transparent cover in warm soapy water. Dry thoroughly. 5. Plug the power cord into a 230-240V AC power outlet and turn the power ‘ON’. 6. Rotate the grind selector to the required grind setting. Note: Allow to dry completely before using. 1. Place the AutoGrinder on a dry, level surface. 2.
Using your Sunbeam AutoGrinder II continued 8. Once the blades have stopped rotating unplug the cord from the power outlet and remove the cover. Rotate the removable bowl anti-clockwise to release and lift to remove. Invert the removable bowl and gently tap the base to loosen and remove the freshly ground coffee. Note: The AutoGrinder II will only operate when the cover is in the locked position.
Care and Cleaning Do not immerse the motor base of the AutoGrinder in water. Do not place the AutoGrinder in the dishwasher. 1. When you have finished grinding, unplug your AutoGrinder II from the power outlet. 3. Wash the cover in warm soapy water. Rinse and dry thoroughly. Wipe the exterior of the AutoGrinder with a damp cloth. 4. To store the power cord, pull down the base and wrap the cord around the AutoGrinder II. 2. Use the soft cleaning brush to clean around the blades.
Notes
12 Month Warranty This Sunbeam product is covered by a 12 month replacement or repair warranty, which is in addition to your rights under the Australian Consumer Law (if your product was purchased in Australia) or New Zealand Consumer Guarantees Act (if your product was purchased in New Zealand). Should you experience any difficulties with your product during the warranty period, please contact our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand.
Need help with your appliance? Contact our customer service team or visit our website for information and tips on getting the most from your appliance. In Australia Visit www.sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 is a registered trademark. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. © Copyright. Sunbeam Corporation Limited 2013.
