Operation Manual

7
Important Notes:
• Spotsandmarksonthesurfaceofthe
burrsarepartofthehardeningprocess.
Thesemarksdonotaffecttheperformance
ofthegrinderorthetasteofthecoffee.
• Ensurethecoffeegrinderisswitchedoff
andunpluggedfromthepoweroutletprior
tocleaning.
• Donotimmersethemotorbaseofthe
coffeegrinderinwater.
• Donotimmerseanypartoftheburr
assemblyinwateroranyotherliquid.
• Donotplaceanypartsofthecoffeegrinder
inthedishwasher.
• Donotuseabrasivecleansersorscouring
pads.
Cleaning the base and coffee container
1.Cleanthemotorbaseexteriorusinga
dampsoftspongewithmilddetergentand
wipedry.
2.Washthebeanhopper(onceremoved)and
coffeecontainerinwarmsoapywater,then
rinseanddry.
Cleaning the burrs
Ifthecoffeegrinderisusedfrequently(every
day),theburrsneedtobecleanedevery
threeweekstoensurebestperformanceof
thecoffeegrinder.Regularcleaninghelps
theburrsachieveconsistentgrindingresults,
whichisespeciallyimportantwhengrinding
coffeeforespresso.
NOTE:ALWAYSemptyallthecoffeebeans
beforeremovingthebeanhopper.
Thiscanbedonebysimplyturningthe
grinderupsidedownandemptyingthebeans
intoacontainer
1.Ensurethecoffeegrinderisswitchedoff
andunpluggedfromthepoweroutlet.
2.Toremovethebeanhopperwithtopburr
andcollarfromthegrinderbase,turnthe
collaranti-clockwiseuntilitstops.
Seefigure7.
3.Pressandholddownthe‘UNLOCK’
buttonattherearofthegrinderbaseand
continuetoturnthecollaranti-clockwise
untilthenotchonthecollarisalignedwith
thearrowontherearofthegrinder.
Seefigure8.
Care and Cleaning
Figure 7
Figure 8