CONICAL BURR COFFEE GRINDER II EM0500 EM0490
Heading 2
Contents Sunbeam’s Safety Precautions 2 Congratulations 3 Features of your Cafe Series® Conical Burr Coffee Grinder II 4 Functions of your Cafe Series Conical Burr Coffee Grinder II 6 ® Operating your Cafe Series® Conical Burr Coffee Grinder II 8 Adjusting the Grind Setting 11 Recalibration Guide 13 Care and Cleaning 16 Important instructions – retain for future use.
Sunbeam’s Safety Precautions SAFETY PRECAUTIONS FOR YOUR SUNBEAM COFFEE GRINDER • Check the hopper for the presence of foreign objects before using. • Always operate the grinder with the bean hopper properly inserted in the grinder. • Do not place your hand in or near the burrs while the grinder is in operation. • Always place the unit on a flat, level surface.
Congratulations Congratulations on the purchase of your Sunbeam Cafe Series® Conical Burr Coffee Grinder. The Sunbeam Cafe Series® delivers quality, style and superior performance capturing the essence of the commercial kitchen. Inspired by heavy-duty equipment found in restaurants, cafes and bars, the Sunbeam Cafe Series® is built to last. It brings together a range of appliances designed to expertly create authentic café food and beverages at home.
Features of your Cafe Series® Conical Burr Coffee Grinder 400g Bean hopper The 400g capacity bean hopper has a hopper closure arm for easy removal and preventing accidental spills. It allows the user to transfer any un-used beans to an ideal storage unit to preserve freshness. Burr shield Grind adjustment collar Large and easy to use, the collar has a wide-range of 40 grind settings.
Conical burrs The metal conical burr design achieves excellent grind consistency and minimises heat transfer to the coffee due to the slowly rotating burrs. Hopper closure arm Grind delivery chamber The grind delivery chamber is designed to assist in delivering the ground coffee directly into the group handle or coffee grind container.
Functions of your Cafe Series® Conical Burr Coffee Grinder II No Mess Design The new static reducing design makes light work of the grinding process. So you can enjoy the benefits of drinking a true espresso made from freshly ground coffee beans without the mess. Slow speed grinding The combination of a powerful gear-driven motor and conical burr design delivers a slow speed grinding process. This minimises the heat transferred to the coffee, protecting its aromatic profile.
Functions of your Cafe Series® Conical Burr Coffee Grinder II (continued) Grind on demand As with commercial bar grinders, the ‘Auto’ function allows coffee beans to be freshly ground directly into the group handle on demand as required by the coffee maker, providing complete dosing control and most importantly a fresh grind without loss of aroma and flavour.
Operating your Cafe Series® Conical Burr Coffee Grinder II Before using the coffee grinder, wipe the base exterior with a damp cloth. Wash the bean hopper, hopper lid and ground coffee container in warm soapy water, then rinse and dry. Note: Do not immerse the burrs in water or any other liquid. 4. Place the hopper lid onto the bean hopper. 5. Plug the power cord into a 230-240V AC power outlet and switch the power on. 6.
Operating your Cafe Series® Conical Burr Coffee Grinder II (continued) For grinding continuous quantities 7. Remove the lid from the ground coffee container and slide onto the preparation mat. The coffee container will fit comfortably into the domestic size group handle locator, see figure 3. For grinding into the group handle 10. Position the group handle into the group handle locator, see figure 5.
Operating your Cafe Series® Conical Burr Coffee Grinder II (continued) Figure 7 Figure 9 13. When the basket is full, pull the group handle off the button. Collapse the coffee in the basket by tapping it on the bench and repeat until the desired amount of coffee has been ground. 15. Wipe the edge of filter to remove any coffee grinds. Figure 8 14. When the desired amount has been ground, tamp and twist the coffee grinds. See figure 8.
Adjusting the Grind Setting Grind setting table SETTING BREWING METHOD 0–7 Turkish 7 – 12 Espresso for Cafe Series® 12 – 20 Espresso for domestic machine with dual wall filters 10 – 15 Stove Top 18 – 21 Aero Press 25 – 30 Automatic Perculator, Manual Pour Over 30+ Plunger The wide-range of 40 grind settings allows for precision adjustment. The coffee maker has complete control of the particle size and ultimately the quality of the resulting brew.
Adjusting the Grind Setting (continued) Always Remember 12 PROBLEM DESCRIPTION RESULT OVEREXTRACTION Over development of flavour particles (sugars etc.
Recalibration Guide What is recalibration? Recalibration is the process of adjusting the width between burrs which affects the coarseness or fineness of the coffee grinds that are produced. The further apart the burrs are the coarser the final grind, comparatively the closer the burrs are together the finer the final grind will be. How often do I need to recalibrate? This will depend on how frequently you use your Cafe Series® Conical Burr Grinder II.
Recalibration Guide (continued) Step 3: To remove the top burr from the grind adjustment collar lift it out using the wire handle. See figure 12. Step 5: With one hand firmly grasp the body of the top burr. To recalibrate the top burr hold onto the wire handle and turn in a clockwise or anti-clockwise direction. See figure 14. Figure 12 Step 4: When holding the top burr you will observe that there are two screws that sit below the outside rim.
Recalibration Guide (continued) Step 7: If you have removed the grind adjustment collar pick it up and ensure that the downward pointing arrow on the grind adjustment collar is aligned with the “ALIGN” arrow on the motor base. This will slot into place with ease. Figure 18 Figure 16 Step 8: Using the wire handle pick up the top burr and turn in a clockwise direction until the two arrows align, you should hear a clicking noise.
Care and Cleaning Important Notes: • Spots and marks on the surface of the burrs are part of the hardening process. These marks do not affect the performance of the grinder or the taste of the coffee. • Ensure the coffee grinder is switched off and unplugged from the power outlet prior to cleaning. • Do not immerse the motor base of the coffee grinder in water. • Do not immerse any part of the burr assembly in water or any other liquid. • Do not place any parts of the coffee grinder in the dishwasher.
Care and Cleaning (continued) 3. Press and hold down the ‘UNLOCK’ button at the rear of the motor base and with the other hand turn the grind adjustment collar anti-clockwise until the graphic arrow on the collar is aligned with the arrow on the motor base, see figure 22. Figure 24 6. Clean the bottom burr using the burrcleaning brush, see figure 25. Figure 22 4. While holding down the ‘UNLOCK’ button lift out the top burr from the grind adjustment collar using the handle, see figure 23.
Care and Cleaning (continued) Replacing the burrs To inquire about having the burrs replaced contact Sunbeam Customer Care on Australia 1300 881 861 New Zealand 0800 786 232 Figure 26 Adjusting the burrs for wear The conical burrs are made of tool hardened steel for extra long life. However after prolonged use the burrs will require adjustment to compensate for wear.
Notes
The Sunbeam 5 Year Motor Guarantee Sunbeam has built its reputation on manufacturing quality electrical appliances. Our Cafe Series® Coffee Grinders (EM0480, EM0500) are constructed from the highest quality materials. So much so, we guarantee our Coffee Grinders' motors for five (5) years against faulty materials or manufacture. This guarantee is just another expression of our confidence in the way we make appliances at Sunbeam.
12 Month Warranty This Sunbeam product is covered by a 12 month replacement or repair warranty, which is in addition to your rights under the Australian Consumer Law (if your product was purchased in Australia) or New Zealand Consumer Guarantees Act (if your product was purchased in New Zealand). Should you experience any difficulties with your product during the warranty period, please contact our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand.
Need help with your appliance? Contact our customer service team or visit our website for information and tips on getting the most from your appliance. In Australia Visit www.sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 is a registered trademark. ‘Cafe Series’ is a trademarks of Sunbeam Corporation. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. © Copyright.