User Manual
STEAM
12 
O’CLOCK
3 
O’CLOCK
MAX
STEAM
RETURN
STEAM
60-65°C
PAUSE
Steam Wand position: 
- Arm at 12 o'clock.
- Tip at 3 o'clock.
THERMOBLOCK
58MM CAFÉ GROUP HEAD
REMOVE
THERMOBLOCK
58MM CAFÉ GROUP HEAD
INSERT
INSERT
PLEASE EMPTY TRAY
REMOVE
TURN
HOT
WATER
RETURN
BANG
8 9
Coffee Making Guide for the Mini Barista Espresso Machine
10. Prep Milk Jug 11. Before Texturing Milk 14. Purge and Clean Steam Wand
12. Start Texturing Milk
15. Milk Finishing Touches 16. Thermoblock Auto Purge 
17. Cleaning Up13. Milk Texturing
Pour milk in one 
steady stream.
When cooling to espresso temp,
STEAM LIGHT flashes & water purges
into Drip Tray. Keep Drip Tray in place.
Tap Jug to release 
larger air bubbles.
Swirl Jug to blend milk 
& create a 
silky texture.
Return DIAL to the 
vertical position.
Wipe Steam Wand 
& Tip with a damp 
cloth.
Turn DIAL to HOT 
WATER for 1-2 secs.
Milky water will
come out of
Steam Wand.
Pro Tip:
To keep optimum 
Steam Wand 
performance, 
always purge & 
clean the Steam 
Wand after 
texturing milk.
Remove spent cake 
from Group Handle.
Check if the 
Drip Tray needs 
emptying. 
Turn Group Handle & remove from
Group Head.
Wash parts with 
warm water.
Texturing makes 
a smooth hissing 
noise.
Check milk is 
moving in a 
whirlpool action.
Insert Steam Wand
Tip just below the 
surface of the milk.
Some water
may come out
of Steam Wand.
STEAM LIGHT is ON = 
Steam Ready. Pause 
steam by returning DIAL.
Fill Jug with cold 
milk to just below the 
bottom of the spout.
Turn DIAL to STEAM. 
STEAM LIGHT flashes 
= Warming up.
Pro Tip:
For best
milk texturing 
results, ensure
steam has first
warmed up
(STEAM LIGHT 
fully ON). 
You will hear
the Pump start.
Turn DIAL back to 
STEAM position to 
start texturing milk.
Milk ready when Jug 
is too hot to touch for 
3 secs.
Return DIAL to 
vertical position.
As milk level rises, 
lower Jug to keep Tip 
just below surface.
When desired micro-
foam achieved, immerse 
Steam Wand half way.
Remove Jug from 
Steam Wand.
Coffee Making Guide for the Mini Barista Espresso Machine
EM4300_20EM1(ANZ).indd 8-9 2/18/20 3:49 PM










