Operation Manual

37
Advanced programming options continued
Factory Reset
To undo any changes made to the program
you can revert back to the original factory
settings.
To do this you need to follow the instructions
below:
1. Insert the power cord into a 230-240V AC
power outlet and switch the power ‘ON’.
Note: Although the espresso machine is ON
at the power outlet ensure that the actual
espresso machine power is ‘OFF’. Therefore
no lights will be illuminated on the espresso
machine control panel.
2. Press and hold down the ‘MANUAL’ button.
3. While still holding down the ‘MANUAL’
button briefly press the ‘POWER’ button
and release.
4. Release the ‘MANUAL’ button.
Note: This resets ALL the program settings
back to factory settings, including the
program espresso pour volumes, espresso
& steam thermoblock temperatures and the
steam pump rate.
5. To indicate that you have successfully reset
the factory settings the light above the
‘POWER’ button will flash and 4 beeps will
sound.
Note: The expresso machine will then
automatically power on and begin heating up.