CAFÉ SERIES CONICAL BURR COFFEE GRINDER User Guide EMM0500BK
Contents Xxx 2-3 4-5 6 7-8 9 10-12 13 Sunbeam’s Safety Precautions Features of your Café Series Conical Burr Coffee Grinder Functions of your Café Series Conical Burr Coffee Grinder Operating your Café Series Conical Burr Coffee Grinder Adjusting the grind setting Care and cleaning Warranty Sunbeam’s Safety Precautions SAFETY PRECAUTIONS FOR YOUR CAFÉ SERIES CONICAL BURR COFFEE GRINDER • C heck the grinding bowl for the presence of foreign objects before using.
Sunbeam’s Safety Precautions Xxx Sunbeam is very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance: • R ead carefully and save all the instructions provided with an appliance. • Always turn the power off at the power outlet before you insert or remove a plug.
Features of your Café Series Conical Burr Coffee Grinder A F G B H C I J D E 4 K L
Features of your Café Series Conical Burr Coffee Grinder A. 2 50g bean hopper The 250g capacity bean hopper has a shutter release mechanism for easy removal and preventing accidental spills. It allows the user to transfer any un-used beans to an ideal storage unit to preserve freshness. B. Grind adjustment collar Large and easy to use, the collar has a wide-range of 24 grind settings.
Functions of your Café Series Conical Burr Coffee Grinder Slow speed grinding The combination of a powerful gear-driven motor and conical burr design delivers a slow speed grinding process. This minimises the heat transferred to the coffee, protecting its aromatic profile. Dual mode settings For convenience, there are two modes of operation - the 'Auto' function for grinding coffee on demand or 'On' for grinding continuously into a container.
Operating your Café Series Conical Burr Coffee Grinder Before using the coffee grinder, wipe the base exterior with a damp cloth. Wash the bean hopper and hopper lid in soapy water. Rinse and dry before using. Note: Do not immerse the burrs in water or any other liquid. Note: Do not place any parts of the coffee grinder in the dishwasher. 1. Place the coffee grinder on a dry, level surface. 2. To attach the bean hopper, position bean hopper onto the top of the motor base, push down and turn clockwise.
Operating your Café Series Conical Burr Coffee Grinder 8. To grind coffee, flip the switch to the ‘On’ position, see Figure 4. 12. Flip the switch to the ‘Auto’ position, see Figure 6. 9. When the desired amount of coffee has been ground, flip the switch to the ‘Off’ position. Remove the coffee container and scoop out the ground coffee. 13. To grind coffee, press the group handle against the button located in the centre of the group handle cradle, see Figure 7. For grinding into the group handle 10.
Adjusting the grind setting as measured with the carafe. Finer grinds usually require less coffee, but using too fine a grind will result in a brew that is bitter in flavour. 3. For those that prefer weaker coffee, continue to use the recommended amount of ground coffee and then dilute the resulting brew with fresh hot water. Doing this will maximise flavour and minimise bitterness. 4.
Care and cleaning Important Notes: • Spots and marks on the surface of the burrs are part of the hardening process. These marks do not affect the performance of the grinder or the taste of the coffee. • Ensure the coffee grinder is switched off and unplugged from the power outlet prior to cleaning. • Do not immerse the motor base of the coffee grinder in water. • Do not immerse any part of the burr assembly in water or any other liquid.
Care and cleaning 3. 4. 5. Press and hold down the ‘UNLOCK’ button at the rear of the motor base and with the other hand turn the grind adjustment collar anti-clockwise until the arrow on the collar is aligned with the arrow on the motor base, see Figure 10. 6. Clean the bottom burr using the burr cleaning brush, see Figure 13. 7. Once both burrs are cleaned, return the grind adjustment collar to its position in the motor base. 8.
Care and cleaning Adjusting the burrs for wear The conical burrs are made of tool hardened steel for extra long life. However, after prolonged use the burrs will require adjustment to compensate for wear. A sign of this is when the grinds are not as fine as they used to be, check by rubbing some of the grinds between two fingers or for espresso the extraction will also show signs that the grind needs adjusting.
Notes 13
Notes 14
Warranty Warranty Should you experience any difficulties with your product during the warranty period, please contact Sunbeam Customer Care: Suite 1, Level 1, 13 Lord Street, Botany NSW 2019 Australia Level 6, Building 5, Central Park, 660–670 Great South Road Greenlane, Auckland 40 15 :
Need help with your appliance? Contact our Customer Care Team or visit our website for information and tips on getting the most from your appliance. AUSTRALIA www.sunbeam.com.au Visit: Phone: 1300 881 861 Suite 1, Level 1, Mail: 13 Lord Street, Botany NSW 2019 Australia NEW ZEALAND www.sunbeam.co.
