Feel Perfect Therapeutic Heat Pad Instruction Booklet EP5000 Please read these instructions carefully and retain for future reference.
Heading Sub Heading Body copy with not indent applied.
Contents Sunbeam’s Safety Precautions 2 Features of your Heat Pad 4 Using your Heat Pad 6 Care and cleaning 7 Important instructions – retain for future use.
Sunbeam’s Safety Precautions • • • • • • • • Sunbeam is very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance: Read carefully and save all the instructions provided with an appliance. Always turn the power off at the power outlet before you insert or remove a plug.
Safety Precautions for your Heat Pad • Do not switch the heat pad on if moist or wet. • Do not use pins, needles, safety pins or other sharp items on your heat pad. • Examine periodically for signs of wear or damage on the heat pad cords. If there are such signs, or the heat pad has been misused, return it to an authorised service agent for inspection. • Only use your heat pad with the controls supplied or marked equivalent.
Features of your Heat Pad EP5000 Controller Temperature Setting Button Power Button Controller 1. 2. 3. 4. 5.
Sleeve Controller Connector (on the underside of the pad, not shown) 5
Using your Heat Pad Using your Heat Pad • Remove all packaging • Ensure the power button on the controller is in the off position (not pressed in) • Connect the controller to the heat pad • Insert the plug into the power outlet and switch on • The heat pad will automatically default to setting 5 for rapid heating, and begin to heat up. • Setting 5 is for heat up only. Do not use this setting for continuous or overnight use.
Care and Cleaning This Feel Perfect heat pad features waterproof heating elements, making them fully immersible and safe to wash by hand or machine. Before cleaning your heat pad, ensure that the controls are unplugged from the heat pad. Spot cleaning Sponge the affected area using a neutral wool detergent or mild soap flakes mixed with lukewarm water. Sponge twice with clean water to remove detergent. Remove excess water by compressing the wet area between two towels.
Notes
2 Year Warranty This Sunbeam product is covered by a 2 year replacement or repair warranty, which is in addition to your rights under the Australian Consumer Law (if your product was purchased in Australia) or New Zealand Consumer Guarantees Act (if your product was purchased in New Zealand). Should you experience any difficulties with your product during the warranty period, please contact our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand.
Need help with your appliance? Contact our customer service team or visit our website for information and tips on getting the most from your appliance. In Australia Visit www.sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 is a registered trademark. ‘Feel Perfect’ is a registered trademarks of Sunbeam Corporation. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. © Copyright.