FOOD SLICER Instruction Booklet Please read these instructions carefully and retain for future reference ES9600
Contents Sunbeam’s Safety Precautions 2 Congratulations 3 Features of your Sunbeam Café Series® Food Slicer Before using your Sunbeam Café Series® Food Slicer Using your Sunbeam Café Care and cleaning Series® Food Slicer 4 6 7 9 1
Sunbeam’s Safety Precautions SAFETY PRECAUTIONS FOR YOUR FOOD SLICER. • Keep fingers well away from the blade when in use. • Use extreme care when handling the blade. • Do not place any part of this appliance in a dishwasher. • The appliance is designed for household use only. It is not intended for commercial use. • Do not use outdoors. • The safety switch prevents accidental operation of the slicer by pressing the switch plate.
Congratulations Congratulations on the purchase of your Sunbeam Café Series® Food Slicer. The Sunbeam Café Series® delivers quality, style and superior performance, capturing the essence of the commercial kitchen. Inspired by heavy-duty equipment found in restaurants, cafés and bars, the Café Series® is built to last. It brings together a range of appliances designed to expertly create authentic café food and beverages at home.
Features of your Sunbeam Café Series® Food Slicer Sliding food guide Supports the food and slides back and forth for effortless slicing. Safety food holder Holds food pieces in place while slicing and ensures fingers are kept well away from the blade for added safety. Extension tray Connects to the sliding food guide and is used to support foods that are longer in length than the sliding food guide, when slicing.
2 K Variable thickness dial Allows you to slice foods to a variety of thicknesses, from 0mm to 23mm. U NL OC Dual safety switch system The 'ON' button must be pressed and the safety switch pushed forward, simultaneously, for safety and prevention of any accidental use. 135 watt motor To handle the toughest slicing tasks. Stainless steel blade The high quality German circular blade is specially designed for precise slicing of meats, cheese, fruit, vegetables and breads.
Before using your Sunbeam Café Series® Food Slicer Assembling your food slicer 1. Place the food slicer on a flat level surface. Note: You will know when the sliding food guide is correctly positioned when the guide slides freely along the tray. 2. Tilt the sliding food guide at approximately 45° angle ➀ and place the guide in the grooves of the base ➁. Lower the carriage onto the base. See Figure 1. 3. Slide the safety food holder onto the arm of the sliding food guide.
Using your Sunbeam Café Series® Food Slicer Note: If the length of the food to be sliced is longer than the sliding guide, connect the extension tray to the sliding food guide, using the 2 hole cutouts on the sliding guide to align and connect the extension tray. See Figure 4. C K 1. Ensure that all parts of the food slicer are correctly in place. Place the fully assembled appliance on a flat level surface with the width selection dial to your left. See Figure 2. O UNL Figure 2 2.
Using your Sunbeam Café Series® Food Slicer continued 5. Select the desired width setting by turning the dial clockwise for thicker slices or counter clockwise for thinner slices. 6. Insert the plug into a 230-240V power outlet and turn the power on. 7. To operate the food slicer, grasp the safety food holder firmly with your right hand and push the safety switch forward with the left hand. Without releasing the safety switch, press down the 'ON' button at the same time.
Care and cleaning 2. Remove the safety food holder, sliding food guide and food collection tray and wash in warm water using a mild detergent. 4. Turn the variable thickness dial to the 'Slide to Clean' setting and pull the dial out. The adjustable thickness panel will slide freely for easy cleaning. When finished cleaning, turn the variable thickness dial to zero. Note: Do not place any part of this appliance in a dishwasher. 5. Clean the housing using a damp cloth and then dry. 1.
Notes
Notes
Notes
12 Month Replacement Guarantee In the unlikely event that this appliance develops any malfunction within 12 months of purchase (3 months commercial use) due to faulty materials or manufacture, we will replace it for you free of charge. Should you experience any difficulties with your appliance, please phone our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand. Alternatively, you can send a written claim to Sunbeam at the address listed below.
Need help with your appliance? Contact our customer service team or visit our website for information and tips on getting the most from your appliance. In Australia Visit www.sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 is a registered trademark. Sunbeam ‘Cafe Series’ logo and words are registered trademarks of Sunbeam Corporation. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet.