User Manual

5
Using your Slicing Attachment continued
Preparing the Slicing Attachment
1. Remove blades from within the storage
pusher.
2. Select desired blades.
3. Remove the Blade Cover by turning to a
clockwise direction.
4. Remove the Blade Cone from the Feed
Tube.
5. Remove blades currently in the Blade
Cone by pressing down on the tab at the
top of the cone and pulling forward.
6. Repeat on opposite side.
7. Place new blades in the Blade Cone by
aligning the two tabs at the base of the
blade, with the base of the Blade Cone
and press the top tab in to place.
8. Insert the Blade Cone into the feed tube.
9. Lock the Blade Cover over the front of the
Feed Tube.
10. Insert the slicing attachment into motor
unit hole according to “unlock” position,
then anti-clockwise turns it to “lock”
position.
11.To disassemble, operate according to the
above opposite direction.
Food pusher cover
Blades
Motor unit
Food pusher (Blades storage box)
Blade
Blade cone
Blade cover
Feed tube
On/Off Switch
Power cord