Use and Care Manual

English-3
mixer shuts down because of overheating, reset the speed
control dial to OFF and unplug unit from wall. Wait 1 minute
and plug back in. Do not plug unit back in unless speed
selection is set to OFF.
16. Any servicing, other than cleaning and user maintenance shall
be performed by an authorized service representative.
17. When mixing liquids, especially hot liquid, use a tall container
or make small quantities at a time to reduce spillage.
18. Don’t Abuse Cord. Never carry the mixer by the cord or yank
it to disconnect from an outlet; instead, grasp the plug and
pull to disconnect.
SAFETY
Th I S UN I T IS F O R hO U S E h O l D USE ON l y
The motor of your Mixer is protected by a heat cured insulation.
This is a standard process. Due to the heat curing of the insulation,
you may experience an odor and possibly a slight wisp of smoke
from your mixer’s motor. This effect will disappear after the first
few uses.
SPECIAL INSTRUCTIONS
FO R PR O D U c T S PU R c h A S E D I N T h E U.S. A N D cA N A D A ON l y
To reduce the risk of electrical shock, this appliance is equipped
with a 3-prong plug. If you are unable to insert the plug into the
outlet, contact a qualified electrician to replace the obsolete outlet.
Do not attempt to defeat the safety purpose of the 3-prong plug
by modifying it in any way. Also, do not pull, twist or otherwise
abuse the power cord; instead, grasp the plug and pull to remove
from the outlet.
SAVE THESE INSTRUCTIONS
Welcome
Congratulations on your purchase of a Sunbeam
®
Stand Mixer!
To learn more about Sunbeam
®
products, please visit us at
www.sunbeam.com.
627-FPSBSM210X_IB_REVB.indd 4 8/10/11 12:14:08 PM