X-Press Sunbeam X-Press Cordless Beard Trimmer & Shaper ® ® 4 in 1 Personal Groomer Instruction Booklet MG6500 Instruction Booklet MG5500 Please read these instructions carefully and retain for future reference.
Contents Sunbeam’s Safety Precautions 3 Features of your Cordless Beard Trimmer & Shaper 6 Using your Cordless Beard Trimmer & Shaper 8 Help Line 10 Battery Disposal 11 Care and Cleaning 11 Important instructions – retain for future use.
Sunbeam’s Safety Precautions • • • • • • • • SAFETY PRECAUTIONS FOR YOUR CORDLESS BEARD TRIMMER & SHAPER Keep out of the reach of children For household use only Never touch the power plug with wet hands when plugging in or unplugging If the appliance is used with an extension cord or electrical portable outlet device, they should be positioned so they are not subject to splashing or moisture Do not place the blades in water or any other liquid.
Sunbeam’s Safety Precautions 4 Sunbeam are very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance: • Read carefully and save all the instructions provided with an appliance. • Always turn the power off at the power outlet before you insert or remove a plug.
Sunbeam’s Safety Precautions continued • Never leave an appliance unattended while in use. • Do not use an appliance for any purpose other than its intended use. • Do not place an appliance on or near a hot gas flame, electric element or on a heated oven. Do not place on top of any other appliance. • Do not let the power cord of an appliance hang over the edge of a table or bench top or touch any hot surface.
Features of your Cordless Beard Trimmer & Shaper Beard & moustache trimmer On / off switch Storage stand / charging base 6
Adjustable cutting guide Shaping blade Nose & ear hair trimmer Shaving Head Moustache comb Cleaning brush Oil Adaptor 7
Using your Cordless Beard Trimmer & Shaper Using for the first time • The appliance must be fully charged before using for the first time. • To reach the optimum recharge capacity, the batteries should be charged for 8.5 hours. Do not charge for longer than this time. • Ensure that the Beard Trimmer & Shaper is switched off by pushing down the on / off switch.
Using your Cordless Beard Trimmer & Shaper continued • Switch the appliance on. • Insert the appliance into the ear or nose but no more than 6mm. • Rotate in a circular movement. • The appliance can also be used to trim stray eyebrow hairs. Move the appliance slowly and carefully keeping the unit away from the eye socket. • Remove all attachments by twisting anticlockwise and pulling off.
Using your Cordless Beard Trimmer & Shaper continued • This attachment can also be used to trim sideburns. Using the beard shaping blade • Attach the beard shaping attachment by placing on the unit and turning clockwise until it clicks into place. • Switch the appliance on. • Use this blade to create smooth lines and edges or your own unique beard design. Using the shaver head • Attach the shaver head attachment by placing on the unit and turning clockwise until it clicks into place.
Battery Disposal At the end of the product’s life, the Cordless Beard Trimmer & Shaper must be returned to a Sunbeam Service Centre for correct disposal of the Nimh rechargeable battery. The battery must be removed from the appliance before it is scrapped. The battery is to be disposed of safely. Care and Cleaning • Do not immerse the appliance in water or any other liquid. • The appliance can be wiped with a cloth dampened in water and a mild detergent. Rinse and dry thoroughly.
Consumer Hotline Australia 1800 025 059 New Zealand 0800 786 232 www.sunbeam.com.au ‘Sunbeam’, is a registered trademark of Sunbeam Corporation. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. Backed by Sunbeam's 2 Year Replacement Guarantee and National Service Network. © Copyright. SUNBEAM CORPORATION LIMITED 2005. (INCORPORATED IN N.S.W.) A.C.N. 000 006 771 Sunbeam Corporation is a division of GUD Holdings Ltd.