2356, 2358, 2359 & 2360 ■ Mode d'Emploi BAT TEUR DELUXE MIXMASTER ® Manual de Iinstruccione s BATIDORA MIXMASTER ® DELUXE ■ Instruzioni per l'Uso DELUXE MIXMASTER ® MIXER Gebrauchs anleitung DELUXE MIXMASTER ® MIXER ■ ■ Instruc tion Manual DELUXE MIXMASTER ® MIXER Anvandarhandledning DELUXE MIXMASTER ® MIXERN
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions before using the Mixer. 2. To protect against risk of electrical shock, do not put Mixer in water or other liquid. This may cause personal injury or damage to the product. 3. Close supervision is necessary when Mixer is used by or near children, or incapacitated persons. 4.
11, Do not place Mixer or bowls on or near a hot gas or electric burner, or in a heated oven. 12. Do not use Mixer for other than intended use. 13. Do not leave Mixer unattended while it is operating THIS UNIT FOR HOUSEHOLD USE ONLY When your Mixmaster” Mixer is first used, you may experience an odor and possibly a slight wisp of smoke from your mixer motor. This is caused by the heat curing of the insulation which protects the motor and is normal. After the first few uses, this effect will disappear.
FEATURES The Mix-Finder® dial tells you at a glance which mixing speed to use. No problem ejecting the beaters either – just push the ejector button beside the handle. Thank you for choosing the Sunbeam Deluxe Mixmaster® Mixer. For generations we have been helping cooks prepare moist cakes, light and fluffy meringue, and chewy cookies. You can even make bread with your Sunbeam® Deluxe Mixmaster® Mixer. The Sunbeam® Deluxe Mixmaster® Mixer offers you a choice of 12 different mixing speeds.
As you release the mixer-release trigger, the top of the top of the trigger should clamp around the metal pivot. For models equipped with a head-lock feature–To lower the mixer-head for normal operation, support the mixer head with one hand. Then press in on the head-lock latch. Gently lower the mixer head until the mixer head is in a normal operating position. ASSEMBLING THE STAND MIXER Before assembling the mixer, be sure the Mix-Finder® dial is in the ZERO position and the electric cord is unplugged.
Attaching the Beaters Be sure the Mix-Finder® dial is in the ZERO position and unplug electric cord from the electrical outlet. Lift mixer head up and back to pull it out of the way of the bowl, while holding in an upright position. Side of Bowl Conical Beater Square Beater Insert the beaters, one at a time, using a combination pressing and twisting motion, until the beaters snap into position. If a beater should not properly snap into place, pull it out of the socket and rotate it one quarter turn.
The dough hook with the small washer and foot goes into the socket on the side of the mixer nearest the side of the bowl. The other dough hook with the large washer goes into the socket nearest the center of the bowl. See the dough hook symbols located on the front of the mixer head. About the Worklight Feature Some of our models have a worklight that lights the area inside the mixing bowl. As soon as the electric cord is plugged in, the worklight will glow.
Mixing Guide The mixing guide on your mixer has been designed to help you take the guess work out of preparing foods. Next to each of the numbered speeds on the Mix-Finder® dial are descriptions of the mixing task best suited to that mixing speed. Use those descriptions as a mixing guide when preparing your favorite recipes.
To remove the worklight lens, place the Mix-Finder® dial in the ZERO position and unplug mixer from electrical outlet. Remove beaters or dough hooks from mixer sockets and remove bowl from turntable. Holding the mixer head in an upright position, use a small screwdriver to remove the screw holding the worklight lens in place. CARING FOR YOUR MIXER EJECTING THE BEATERS OR DOUGH HOOKS After you’ve finished mixing, turn the Mix-Finder® dial to OFF and unplug the electric cord from the electrical outlet.
NOTE: Replacement bulbs may be purchased from local hardware or department stores or from your nearest authorized Sunbeam Service Center (6 watt maximum bulb can be used.) To replace the worklight lens, repeat the steps described in “To remove the worklight lens” in reverse order. MIXING AND BAKING SUGGESTIONS • Ingredients should be added to the mixing bowl as they are specified in the recipe.
Combine a small portion of the dry ingredients with the wet ingredients. Mix on Speed 6. Continue adding dry ingredients until the mixture becomes sticky, then turn to Speed 1. Gradually add remaining dry ingredients. If there is high humidity in the air, it may be necessary to add additional flour to the recipe. The high humidity could also extend the amount of time necessary for baking. Guide the mixing bowl with your hands. Use caution to keep hands out of the way of the dough hooks.
DOUGH RISING TIPS HOW TO SHAPE DOUGH FOR A LOAF PAN A large, well-greased, glass mixing bowl is an excellent container in which to raise or proof yeast dough. The ideal temperature is 85°F in a draft-free area. Cover with a light cloth. 1. Using a rolling pin, roll dough into a rectangle. 2. Roll dough into a loaf, starting from narrow end. The final rising should be after the dough has been shaped and placed on the greased baking sheet or pan recommended in the recipe.
&YEAR ~IITED WARRANTY Sunbeam Products Inc. warrants that, for a period of two years from date of purchase, this product shall be free of mechanical and electrical defects in material and workmanship.
■ ©1997 Sunbeam Corporation or its affiliated companies. All rights reserved. Sunbeam,® Mixmaster,® Mix-Finder ® and Burst of Power ® are registered trademarks of Sunbeam Corporation or its affiliated companies. The configuration and/or color combination of the Mixmaster ® Mixer are trademarks of Sunbeam Corporation or its affiliated companies. Distributed by Sunbeam Products Inc., Delray Beach, Florida 33445, or an affiliated company. ■ ©1997 Sunbeam Corporation ou ses filiales.