User Manual

Operating Instructions (continued)
STEAMING HORIZONTALLY
You can also use your Steamer as an iron
to refresh sheets, pillows, mattress, sofas
and more.
1. After the water tank is lled, make
sure there is no residual water
inside the center water tank cavity.
Attach the water tank to the steamer.
Attach the desired accessory to the
steamer and follow steps 3 and
4 under USING YOUR STEAMER
VERTICALLY.
2. Once the Steamer has reached set
temperature, press trigger switch and
in a horizontal position, move the
steamer continuously over the fabric
being steamed.
Caution: The heated press bar gets
hot, do not touch.
3. Once you nish, slide switch to Off
and unplug unit. Wait for unit to cool
completely before emptying the water
tank or removing accessory.
Steaming Tips
• Improper use of the Steamer can
cause property damage due to the
steam. Always read the instructions
in this manual before using your
Steamer.
• Do not operate the Steamer with
an empty water tank. To add water
during operation, turn steamer off,
wait for it to cool down then remove
water tank and rell.
• Always read the fabric care labels
to help determine fabric type to be
steamed. If unsure of fabric’s ber,
test a small hidden area, such as an
inside seam or hem, before steaming.
• For more difcult wrinkles, try
steaming from the underside of the
fabric.
• When steaming, touching fabric
lightly with the steam nozzle can help
in wrinkle removal. It is important to
make contact with the garment and/or
fabric.
• Heavier fabrics require more steam.
• Only use water in the unit. Do not add
cleaning solutions, scented perfumes,
oils or any other chemicals to the
water that can cause damage to the
appliance.
• Do not use steam against wall or
doors.
• When hanging garment on a door
while steaming, be careful not to
damage the door with steam.
• After use, empty water tank by
turning it upside down to ensure all
water empties out and avoid leaks.
• When steaming, move the steamer
continuously over the item being
pressed. Do not keep steamer over an
area for any period of time to avoid
damage to the fabric.
8
Care And Cleaning
CLEANING
1. Make sure unit is off, unplugged and
allow it to cool completely before
cleaning.
2. If there is water in the water tank,
remove the tank and turn it upside
down to ensure all the water empties
out.
3. Wipe exterior surfaces with a soft,
damp cloth. Dry thoroughly.
Warning: Never immerse steamer, cord
or plug in water or any other liquid.
• Do not use abrasive cleaners or
scouring pads that can scratch
the surface.
• Do not place in the dishwasher.
CLEANING WITH VINEGAR AND WATER
It is recommended to clean your Steamer
every two months to reduce mineral
buildup that can affect the performance
of your unit.
1. Turn off the unit and let it cool
completely.
2. Remove water tank and make sure it
is empty.
3. Fill water tank with a solution of 50%
white vinegar and 50% water up to
the max level.
4. Plug unit into electrical outlet and
press trigger to run a full steaming
cycle.
5. Once steaming is nished, ll with
clean water and repeat process until
the vinegar odor is eliminated.
STORAGE
Fold the cord in loops and store the unit
in upright position, in a clean dry place
with a at, sturdy surface. Make sure
the water tank is empty. If not, remove it
and turn it upside down to ensure all the
water empties out and avoid leaks.
9