Installation Guide

IMPORTANT SAFETY INSTRUCTIONS (continued)
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE
Installation GuideRGY
INSTALLATION GUIDE
1. Make sure all packing materials are removed from inside the microwave door.
2.
C
heck the microwave for damage, such as misaligned or bent door, damaged door seals and sealing surface, broken or loos
e
door hinges and latches, and dents inside the cavity or on the door. If there are any damages, do not operate the microwave and
c
ontact Customer Service at 1-866-257-3336.
3. This microwave must be placed on a flat, stable surface to hold its weight and the heaviest food likely to be cooked inside.
4. Do not place the oven where heat, moisture, or high humidity is generated. Do not place microwave near combustible
materials.
5. For correct operation, the oven must have sufficient air flow. Allow 8” of space above the microwave, 4” at the back, and 2” on
eac
h side of the unit.
6. Do not cover or block any openings on the microwave. Do not remove microwave feet. Do not operate the oven without the
gl
ass tray, roller support, and shaft in their proper positions.
7. Make sure the power supply cord is undamaged and does not run under the microwave or over any hot or sharp surface.
8.
T
he socket must be readily accessible so the microwave can be easily unplugged in an emergency.