Owner Manual

Assembly
4. Pour the Flame Glass (H) around the burner. Ensure Flame Glass is
not placed or blocking the Ignition Screen of the burner.
A. Leave adequate space around the Ignition Screen for ventilation.
B. DO NOT block or cover the Ignition Screen with the ame glass.
5. Close the door. Fire table assembly is now complete. At the bottom of
legs, there are four adjustable screws. Consumer can adjust the screws
to an even height.
6. Put the Lid (J), then the Protective Cover (I) on the re table when the
re table is NOT in use or after use, when the re table has cooled down
COMPLETELY. This will prevent water from accumulating in the Firebowl
Pan and to protect exterior surfaces.
4
A B
5
6
Ignition Screen
Page 12