Owner Manual

M6x25 Bolt x 9

x 9

M6 Washer

AA M6x25 Bolt x 5

M6 Washer x 5

Preparation: Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product.

Contact customer service for replacement parts.

Tools Required for Assembly (not included):

Phillips screwdriver with medium blade

1. Locate B/C/D and Door Panel with Door (F). Align hole in all panels and

insert M6x25 Bolts (AA), through M6 Washer (BB), then insert Bolt/Washer

through holes. Loosely tighten with Wrench A (CC). Locate Cross Bar (K)

and Back Panel (B), insert M6x25 Bolts (AA), through M6 Washer (BB), then

insert Bolt/Washer through holes. Loosely tighten with Wrench A (CC).

DO NOT OVERTIGHTEN as you will need to adjust the panels to ensure

proper alignment.

Hardware Used:

Assembly

E F

2. Open the Door and attach the Bottom Plate (E) to the assembled Right

and Left Side Panels (C/D) using M6x25 Bolts (AA) and M6 Washer (BB).

Attach the Cross Bar (K) to Bottom Plate (E) by using M6x25 Bolts (AA)

and M6 Washers (BB), loosely tighten with Wrench A (CC).

DO NOT OVERTIGHTEN as you will need to adjust the panels to ensure

proper alignment.

Hardware Used:

E F

1-877-387-3639 | Page 7