Sunbeam Brushed Remote Control Tower Fan Instruction Booklet FA7500 120cm Brushed Remote Control Tower Fan Please read these instructions carefully and retain for future reference.
Contents Sunbeam’s Safety Precautions Safety Precautions For Your Tower Fan Locating Your Tower Fan Features Of Your Sunbeam Tower Fan Assembling Your Tower Fan Using Your Tower Fan Troubleshooting Guide Care And Cleaning 1 2 3 4 6 8 12 12
Sunbeam’s Safety Precautions • • • • • • • Sunbeam are very safety conscious when • Young children should be supervised to ensure designing and manufacturing consumer prodthat they do not play with the appliance. ucts, but it is essential that the product user • Never leave an appliance unattended while in also exercise care when using an electrical use. appliance.
Safety Precautions For Your Tower Fan • Do not use outdoors. • Do not run the cord of the fan under carpeting. Do not cover the cord with throw rugs, runners or other floor coverings. Arrange the cord away from traffic areas so that it will not be tripped over. • Do not use this fan in the immediate surrounds of a bath, shower, laundry area or swimming pool. • Be sure the fan is placed on a dry, even surface. Do not use on soft surfaces, such as beds, where opening may become blocked.
Locating Your Tower Fan 1.Always locate your fan on a flat level surface. 2.Your tower fan should be located in a dry, cool, well ventilated location. Keep your fan away from heat sources, corrosive gases and avoid direct sunlight. 3.Do not attempt to move your tower fan whilst it is operating. If your fan needs to be moved, please ensure that it is turned off and you use the carry handle at the rear of the fan.
Features Of Your Sunbeam Tower Fan Remote control storage When not in use, store your remote control in the handy storage compartment on the rear of the fan body. Carry handle Convenient carry handle allows you to easily carry your fan from room to room. Power button Simply press the power button to turn the unit on. Control panel The easy to read control panel allows you to quickly see what functions have been selected on your tower fan.
Remote control Adjust the fan setting, auto off or oscillation from anywhere in the room using the full function remote control. Fan speed button Auto Off button Choose from 3 speed settings, low medium or high. The auto off timer allows you to set your tower fan to turn off after either 2, 4 or 8 hours. Nature mode When used in nature mode, the fan speed is randomly adjusted, giving the feeling of a natural breeze. Oscillation Your tower fan oscillates 70°, distributing cool air throughout the room.
Assembling Your Tower Fan Remove the screws from beneath the tower Lower the tower onto the base 1.Using a phillips head screwdriver, remove the 6 screws from underneath the tower. 2.Put the screws aside. You will need them to secure the base. 1.Feed the cord through the hole in the centre of the base. 2.Align the tower so that the lug on the base lines up with the large hole in the bottom of the tower, as shown. 3.Push the tower down onto the base until it is firmly held into position.
Assembling Your Tower Fan (continued) Screw the tower to the base Clip the cord into place Use the 6 screws you put aside earlier to secure the tower to the base. 1.Feed the cord along the channel underneath the base. 2.Screw the cord into the edge of the base using the two screws provided. 3.Stand the fan upright. It is now ready for use.
Using Your Tower Fan Switching the fan on Selecting a fan speed setting 1.Place the fan on a flat level surface. 2.Insert the plug into a 230/240V power outlet and turn the power on. . 3.Press the power button Your Sunbeam tower fan has 3 speed settings as follows: • low speed fan speed light turns red • medium speed fan speed light turns orange • high speed fan speed light turns green To select a fan speed, simply press the fan on the tower or the remote.
Using Your Tower Fan (continued) Using the remote control Changing the batteries 1.Remove the remote control from its compartment at the rear of the tower as shown. 2.Point the remote towards the control panel on the front of the tower to operate. 1.Slide the rear cover off the remote control unit. 2.Replace the spent batteries with 2 fresh LR41 batteries as shown. 3.Replace the rear cover.
Using Your Tower Fan (continued) Using the auto off timer Using the oscillation function The auto off timer automatically switches the fan off after a preset number of hours. To activate this feature, simply press the auto on the tower or on the remote off button control unit. 1.Press the auto off button once to switch the fan off after 2 hours. The timing light on the tower will turn red. 2.Press the auto off button again to have the fan switch after 4 hours.
Using Your Tower Fan (continued) Nature mode Nature mode provides an extra level of comfort by simulating the natural rise and fall of the wind over time. You can use this mode on any fan speed setting. To use Nature mode: 1.Choose a fan speed. button on either the fan or the 2.Press the button will illuminate. remote. The The fan will now vary its speed every few seconds between the chosen fan speed, each lower fan speed, and off.
Troubleshooting Guide If your tower fan fails to operate check the following: If your remote control fails to operate check the following: • Make sure the electrical outlet or circuit breaker is working. • Check for obstructions around the air intake grill. • Ensure that you point the remote towards the front of the fan. • Check that the batteries are not worn. Replace if necessary. Care And Cleaning • Ensure that your fan is switched off and disconnected from the power outlet before cleaning.
2 Year Replacement Guarantee We are so confident of the quality of our product, should this appliance develop any malfunction within 2 years of purchase (3 Months commercial use) due to faulty materials or manufacture, we will replace it for you absolutely free. Should you experience any difficulties with your appliance, please phone our free call customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand.
Consumer Hotline In Australia Visit www.sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 is a registered Trademark of Sunbeam. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. © Copyright Sunbeam Corporation Limited 2008. ABN 45 000 006 771 Sunbeam Corporation is a division of GUD Holdings Ltd.