Quick Start Guide

SETUP

• Use the TV remote to access the setup menu and run initial installation.

• Select Antenna or Cable then enter to continue. If you are using antenna or cable click

start to learn the channels, otherwise select skip. Select Exit Setup to nish.

• Refer to the operator’s manual for detailed instructions. Press “Menu” on the remote

control to access the internal operation manual or visit the product support page on

www.snapav.com or www.sunbritetv.com.

CONTROL

The Veranda can be controlled via the included remote or universal remote.

IR codes are available at: https://www.sunbritetv.com/support/product-support/product-faq.

DOC-052-00