SB-WM-F-L-BL / SB-WM-T-L-BL Weatherproof Universal Fixed and Tilt Mounts For Large Displays INSTALLATION MANUAL
Installation Manual WARNINGS: • Installation by a qualified professional is highly recommended for this product. • Do not begin installation until you have thoroughly read and understand these instructions. • This mount fits displays up to VESA 700mm x 500mm and supports a maximum load of 165 lbs (75 kg). • Ensure the mounting wall will safely support four times the combined weight of the mount and display panel. • The manufacturer does not accept responsibility for incorrect installation.
Installation Manual INSTALLATION: Figure 1 Center of Studs Step 1: Mount the Wall Bracket Assembly Bolts For Mounting on a Stud Wall a. P re-drill holes into two wood studs using a 1/4” drill bit. Be sure to drill into the center of the studs at least 2-1/2” deep. The use of a stud finder is highly recommended. b. Insert four Lag Bolts (U) into holes through the Wall Plate and tighten down. (Figure 1) Bolts WARNING: Tighten bolts so that wall plate is firmly attached, but do not overtighten.
Step 3: Hang TV on to the Wall Plate Figure 5 a. Carefully lift the TV to hook the arms over the top lip of the wall plate. Allow the lower portion of the arms to swivel in under the bottom lip of the wall plate. Do not release the TV until it is completely connected to the wall plate. Adjustments: Figure 6 Adjust Horizontal Level and Tilt Forward Tilt Adjustment (SB-WM-T-L-BL) a.
