SB-WM-F-M-BL / SB-WM-T-M-BL Weatherproof Universal Fixed and Tilt Mounts For Medium Displays INSTALLATION MANUAL
WARNINGS: • Installation by a qualified professional is highly recommended for this product. • Do not begin installation until you have thoroughly read and understand these instructions. • This mount supports displays up to VESA 400X300, and a maximum load of 100 lbs (45.5 kg). • Ensure the mounting wall will safely support four times the combined weight of the Mount and display panel. • The manufacturer does not accept responsibility for incorrect installation.
INSTALLATION: Step 1: Mounting the Wall Bracket Assembly For Mounting on a Stud Wall A. Pre-drill holes into two wood studs using a 1/4” drill bit. Be sure to drill into the center of the studs at least 2-1/2” deep. The use of a stud finder is highly recommended. Figure 1 B. Insert four Lag Bolts (U) and washers (V) into holes through the Wall Plate and tighten down (Figure 1). TIP: To assist in installation, the wall bracket features a screw slot for temporary hanging of the bracket.
Step 3: Hang TV on to the Wall Plate Figure 5 A. Carefully lift the TV to hook the arms over the top lip of the wall plate. Allow the lower portion of the arms to swivel in under the bottom lip of the wall plate. Do not release the TV until it is completely connected to the wall plate (Figure 5). Figure 6 ADJUSTMENTS: Adjust Horizontal Level and Tilt Forward Tilt Adjustment (SB-WM-T-L-BL) A.
