Owner's Manual
Table Of Contents
- Operator’s Manual
- Important Safety Instructions
- Table of Contents
- Supplied Accessories
- TV Installation
- Remote Control Guide
- On-Screen Display Functions
- On-Screen Display Menu
- Adjusting On-Screen Displays
- Troubleshooting
- Care of SunBriteTV
- Specifications
- Features Information and Instructions
- IR Emitter Installation
- Appendix A - RS232 Control Cable Pinout
- Appendix B - RS232 Control Codes
Page 16
TV Installation – Rear Panel Connection Diagrams
CONNECTING TO A SATELLITE OR CABLE SET-TOP BOX (Continued)
1. Make sure the power of the TV and your DVD player is
turned o.
2. Obtain a Yellow Video Cable. Connect the Yellow Video
connector to both your DVD player and Composite’s Yellow
Video connector port o the back of your TV.
3. Connect the white color connector to both your DVD player
and Composite’s white connector port o the back of your
TV.
4. Connect the red color connector to both your DVD player
and Composite’s red connector port o the back of your TV.
5. Turn on the TV and your DVD player.
6. Use the remote control’s source button or the source button
on the right side of the TV to switch to AV1 (CVBS).
Please Note :
7. Refer to the set-top box’s manual to make sure the set-top
box is congured to output correctly to the TV.
8. This model supports SONY’s universal remote code. If
SunBriteTV is not listed, please look up SONY’s codes in your
universal remote’s hand book.
9. This TV will turn o automatically if there’s no signal present
for more than 15 minutes.
Connecting with
Composite (Fair)