Owner's Manual

SunBriteTV Pro 2 Series Operator’s Manual
Page 29
Adjusting On-Screen Displays – Time Menu
Auto Sync
Press the qp buttons to highlight the Auto Sync
adjustment, then use t u to turn auto sync on and o.
Auto sync automatically sets the time on your TV based
on information from TV signals or internet time when
connected to a network. Clock setting adjustments are not
available when auto sync is activated.
Clock
Press the qp buttons to highlight the Clock setting
adjustment, then use t u to enter the Clock submenu
pictured at left.
Now press the qp buttons to highlight the adjustment
you want to make (day, hour, minute, etc.), then use t u to
make the adjustment. Repeat until the clock is set correctly.
Note the TV does not have a battery backed up clock.
Should power be lost the setting will be reset to default.
Sleep Timer
Press the qp buttons to highlight Sleep Timer, then use
qp to select O or 10, 20, 30, 60, 90, 120, 180 or 240
minutes. The TV will turn o automatically after the selected
time has elapsed.
Time Zone
Press the qp buttons to highlight the Time Zone
adjustment, then use qp to select Newfoundland, Atlantic,
Eastern, Central, Mountain, Pacic, Alaska or Hawaii time
zone.
Time Format
Press the qp buttons to highlight the Time Format
adjustment, then use qp to select 12-hour or 24-hour
(military) time format.
OSD Active Time
Press the qp buttons to highlight the OSD Active time
adjustment, then use t u to select the amount of time the
OSD menus will display before timing out, 5s, 10s, 15s, 20s or
always On.
1. Press qp buttons on the remote or CH+/CH- on the TV) to move the cursor to the item to be selected.
2. Press t u buttons on the remote or VOL+/VOL- on the TV to make the desired adjustments.
3. When your adjustments are complete, press MENU or EXIT on the remote or MENU on the TV to exit the main menu.