SB-WM-ART1-S-BL Weatherproof Universal Single-Arm Articulating Mount for Small Displays
SPECIFICATIONS • Weather Resistant Coating • Tilt Range: +/- 13.8° • Stainless Steel Mounting Hardware • Pan/Swivel Range: 180° • Maximum Load: 50 lbs (22.68 kg) • Horizontal Rotation: 360° • VESA Patterns: 75x75, 100x100, 200x200 • Extension/Profile: 3.7” to 15.2” (9.5 to 38.5 cm) WARNINGS • Make sure these instructions are read and thoroughly understood before attempting installation.
INSTALLATION 1-1. Installing the Wall Plate (Drywall) IMPORTANT! For safety reasons, this mount must be secured to a wood stud capable of supporting the combined weight of the mount and display. A. Use a high quality stud finder to locate a single stud where you want to install your mount. B. Mark both edges of the stud to help identify the exact center (see illustration to the right). C. Place the wall plate over the center of the marked stud and level it using the integrated bubble level. D.
3. Final Assembly A. Hold the display assembly over the wall plate and slide the mount into the wall plate. B. To remove, carefully slide the mount upwards and out of the wall plate. C. For extra security and stability, tighten the set screw located on the wall plate (see illustration to the right) using the included hex key. Remember to loosen the set screw before attempting to remove the mount form the wall. D.
