SB-CM-T-M-BL SB-CM-DT-M-BL Weatherproof Universal Single & Dual Ceiling Mount for Medium TVs INSTALLATION MANUAL
WARNING • We highly recommend this product be installed by a qualified professional. • Please do not begin installation until you have thoroughly read and understood these instructions. • This mount supports display mounting from VESA 75x75, 100x100, 200x100 and 200x200 • This mount supports a maximum load of 80 lbs (36.4 kg). • Ensure the ceiling will safely support the combined weight of the mount and your chosen display. • The manufacturer does not accept responsibility for incorrect installation.
INSTALLATION Step 1: Mark Mounting Hole Locations Place the ceiling plate on the mounting surface and mark the mounting hole locations. Fig 1 Step 2: Mount the Ceiling Plate For Mounting on a Wood Joist (Fig 1) a. Drill two holes into joist using a 3/16” drill bit. Be sure to drill into the center of the joists. b. Insert two lag screws into holes through the ceiling plate and tighten down. WARNING: Tighten screws so that the ceiling plate is firmly attached, but do not over tighten.
Step 4: Attach the Mount Head Screw the mount head on to the end of the extension pole and tighten set screw (Fig 4). Fig 4 Step 5: Attach the Adapter Plate to the Display Attach the adapter plate to the display using M4, M5, M6, or M8 screws. For displays with a hole pattern in a pocket or inputs behind adapter plate, spacers go between adapter plate and display (Fig 5). Step 6: Attach the Adapter Plate with Display to Ceiling Mount Assembly a.
