Manualshelf

Operator's Manual

ManualsBrandsSunBriteTV ManualsAccessoriesSB-HDWT HD Wireless Device with Built In IR Extender Which Supports up to 1080P Resolutions, 30 Meters Line of Sight
12345678910
1. Important Information
Take time to read this user manual before using the SB-HDWT Wireless HD Transceiver.
This manual contains important information and instructions regarding operating your wireless
HDWT-Tx (transmitter) and HDWT-Rx (receiver).
1.1 Warranty
Your SB-HDWT is under limited warranty by SunBriteTV, provided the product is handled
properly for intended use, in accordance with its operating instruction. Examples of actions
that may void this warranty include but are not limited to:
●
Repairs, modification or alterations perfomed by unauthorized service personnel
●
Damages caused by accidents including but not limited to lighting, water, fire, or moisture
●
Use of third-party power adapters, or use of supplied power adapters with power sources
not compliant with the specifications on the labels of the power adaptors
●
Altering, deleting, removing or making illegible the serial numbers on the units.
1.2 Safety Precautions
WARNING!
RISK OF ELECTRICAL
SHOCK DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE THE COVER NO USER-
SERVICEABLE PARTS ARE INSIDE REFER SERVICING TO QUALIFIED PERSONNEL
●
Unplug the power supply for the transmitter and the power cord for the receiver before
you connect or disconnect A/V components to the SB-HDWT system.
●
To prevent electric shock, be sure the electrical plugs used on the transmitter's power
supply and the receiver's power cord fit the AC electrical outlets they are plugged into.
These units are designed for 120-volt, 60-cycle AC power.
●
Be sure the power cord for the receiver and the cord running from the power supply to the
transmitter are routed so they will not be accidentally damaged.
●
Do not overload AC outlets or extension cords by connecting more electrical load than
they were designed to handle. This could result in electric shock or fire.
●
If the SB-HDWT system will not be used for a month or longer, unplug the receiver's
power cord and the transmitter's power supply. This will prevent damage from lightning
strikes.
3