Installation Guide

12
At bottom interior side of left door, attach D-ring slide
bolt (P) with four screws (LL) through provided holes.
1
2
3
x4
LL
P
x4
At top interior side of left door, attach D-ring slide bolt
(P) with four screws (LL) through provided holes.
1
2
2
x4x4
x4
LL
P
Peel film from both sides of window (I).
Lay left door (N) on flat ground with window screw
attachments facing up. Place window gasket (B) into
door channel, then place window (I). Cut excess gasket
length. Through backside of door, secure layers with
thirteen screws (LL)—start with four corner screws and
then finish with remaining screws. DO NOT over tighten
screws. Repeat on right door (M).
Note: The cut portion of window gasket (B) MUST be
assembled on top of door channel.
2
3
1
1
1
x13
B
I
I
LL
N
Door Pre-Assembly