Installation Guide

15
1
3
1
2
9
BB
Y
FF
HH
Place side adaptor bracket (BB) at end of left truss leg (Y).
Secure adaptor bracket with one 2" hex bolt (FF) and
one nut (HH). Repeat for remaining side adaptor bracket
(BB).
Note: DO NOT over tighten side adaptor bracket (BB)
onto end of truss leg (Y). Roof panels will assemble
to truss legs (Y) in later step. After shed assembly is
completed, check that all hardware is securely fastened.
Truss Pre-Assembly (continued)
2
3
1
10
CCC
CCC
DDD
O
LL
x8
Place skylight gasket (DDD) into skylight (CCC). Place
skylight (CCC) onto right roof panel (O). Secure from
underside with eight screws (LL). Make sure rib on roof
panel is seated fully against gasket on skylight.
Repeat for remaining roof panels.