Instructions / Assembly
22
JJ
x4
29
Ê-iVÕÀiÊ«>iÃÊÜÌÊvÕÀÊi>ÃÞÊLÌÃÊ®°Ê7ÀÊvÀÊyÀÊ
to roof. DO NOT use torque wrench. Use easy bolt easy
driver (KK) and hand tighten. Easy bolt head will be flush
when fully seated. DO NOT over tighten easy bolts.
Note: You may hear a click when easy bolt has been
tightened completely.
Note: Front left panel has been removed for clarity.
1
2
E
30
-i`ÊÃÃiLÞÉ7>ÃÊVÌÕi`®
Align tabs on bottom of side panel (E) with slots along
front and rear floors. Lower panel into slots and lock in
place by sliding panel toward front corner.
Note: Use a rubber mallet to “push” side panel (E)
into locked position.