Use and Care Manual
21
Top viewTop view
H
Side viewSide view
28
Before proceeding, make sure
corner is square (top view) where it
meets the floor and that panel is flush
(side view) with floor.
If not, repeat Steps 25–27
until square and flush.
Tip right back corner (H) back to vertical position and
align lower tabs on right side with slots in floor.
1
2
H
27
1
2
H
26
Tip right back corner (H) outward slightly and bend the
corner hinge.
-i`ÊÃÃiLÞÉ7>ÃÊVÌÕi`®