Use and Care Manual
1
2
J
34
Tip right front corner back to vertical position and align
lower tabs on right side with slots in floor.
-i`ÊÃÃiLÞÉ7>ÃÊVÌÕi`®
Top viewTop view
J
Side viewSide view
Before proceeding, make sure
corner is square (top view) where it
meets the floor and that panel is flush
(side view) with floor.
If not, repeat Steps 32–34
until square and flush.
35
36
JJ
x4
-iVÕÀiÊ«>iÊÜÌÊvÕÀÊi>ÃÞÊLÌÃÊ®°Ê7ÀÊvÀÊyÀÊ
to roof. DO NOT use torque wrench. Use easy bolt easy
driver (KK) and hand tighten. Easy bolt head will be flush
when fully seated. DO NOT over tighten easy bolts.
Note: You may hear a click when easy bolt has been
tightened completely.