Installation Guide

Secure side panel with four easy bolts (RR), working from

ﬂoor to roof. DO NOT use torque wrench. Use easy bolt

easy driver (SS) and hand tighten. Easy bolt head will be

ﬂush when fully seated. DO NOT over tighten easy bolts.

Note: You may hear a click when easy bolt has been

tightened completely.

Align tabs on bottom of side panel (N) with slots along

front and rear ﬂoors. Lower panel into slots and lock in

place by sliding panel toward front corner.

Note: Use a rubber mallet to “push” side panel (N) into

locked position.