Installation Guide

26
End view
32
W
M
Repeat steps 30-32 for remaining right roof panel (M) and
rear roof peak (W).
2
3
x4x4
1
1
34
N
F
NN
Pull down each lower corner of roof from outside.
From inside shed, attach tabs on right front corner (F) and
side panel (N) to roof panel with four screws (NN).
2
1
Roof peak
35
NN
x8
Secure roof to both sides of roof truss using eight
screws (NN). Each screw will attach at a corresponding
screw boss on the roof. Make sure roof peak is secured
(highest screw holes on roof truss).
33
TT
x6x10
UU
x10
x10
Push down the right roof panels with roof peaks from
outside. From inside shed, secure roof peaks to left roof
panels together using 10 rubber sealing washers (UU) and
10 sealing screws (TT).
Note: For clarity, illustration is shown with front
header removed.
Assembly - Roof (continued)