Installation Guide

Shed Care and Maintenance

• At regular intervals, inspect your shed to make sure that assembly integrity has been maintained.

• Periodically check that the location you have chosen to set your shed is still level.

• Keep roof clean of snow and leaves.

• To maintain the look of your product, we recommend cleaning it at regular intervals with mild soap and

water. DO NOT use bleach, ammonia or other caustic cleaners, and DO NOT use stiff bristle brushes.

Failure to perform cleaning at regular intervals could result in permanent staining of the plastic. This type

of damage is not covered under warranty.

Assembly Day Tips

• DO NOT attempt to assemble on a day with strong winds.

• DO NOT attempt to assemble on days when temperature is below 32 degrees Fahrenheit.

• Set aside appropriate amount of time to completely assemble shed. An incomplete shed assembly may

pose a safety hazard.

• Make sure you have assistance nearby to lift and secure parts in place.

• Wear light duty work gloves while assembling shed.

• Once roof is assembled, a ﬂashlight may be of use when assembling smaller components inside shed.

• DO NOT use a torque wrench or hand drill to tighten Easy bolts. Use provided Easy Bolt Driver ONLY.

• Suncast provides extra hardware for small fasteners for customer convenience. In some cases, there will

be extra small fasteners once the assembly is complete.

Note: This product contains parts that are used in different orientations to construct the shed. Please take

note of the orientation of the parts shown throughout this instruction manual. Failure to follow instructions

could result in damage to parts. Suncast is not responsible for replacing parts lost or

damaged due to incorrect assembly.