Instructions / Assembly

12
Peel film from both sides of window (S).
Note: One side of film will say "THIS SIDE OUT." Make
sure this side faces out when installing window.
Stand left door (I) vertically. In this order, layer into door
channel the window gasket (TT), door window (S), and
door window frame (Q). Through the back of door, secure
layers with ten screws (LL). Start with four corner screws
and finish with remaining screws. DO NOT over tighten
screws.
Note: The cut portion of window gasket (TT) MUST be
assembled on bottom of door channel.
Note: At least two people are needed during
assembly.
THIS SIDE OUT
1
S
1
2
2
x10
TT
LL
S
Q
x10
I
Door Pre-Assembly